Air Hand Tools

• Packed in a rugged plastic storage case.
• Packed in a rugged plastic storage case

Contains: (42) 3/32″ x 1-3/16″, (30) 5/64″ x 1-5/16″, (25) 7/64″ x 1-5/8″, (25) 5/64″ x 1-9/16″, (20) 9/64″ x 1-3/4″ and (8) 5/32″ x 2-15/16″…. more >>

>>Read more about Advanced Tool Design Model ATD-353 150 Piece Hair Pin Assortment

• The pneumatic tool lubricant can be used in both air tools and nailers
• For all oil lubricated pneumatic tools
• One year warranty

8 OZ Tool Oil, For Use With Oil Lubricated Air Tools, Helps Maximize Tool Performance & Increase Tool Life…. more >>

>>Read more about Campbell Hausfeld ST1270 Tool Oil 8-Ounce

• Texture gun and large hopper
• Ideal for spraying walls and ceilings, fireproofing, stucco, decking, and waterproofing
• Two sizes of air tips 1/8-inch to 3/32-inch
• Built-in angle feature
• 1.5 gallons; 16 by14 by 11 inches; manufacturer’s defect warranty

A texture gun and hopper setup like the PC501 is useful for quickly covering large surface areas such as drywall. Not only does it give you a nice textured effect, but it effectively hides imperfections, nails, and tape lines in a single application. This alone can save you a ton of time.On the downside, hoppers like this are a little unwieldy. When they’re full of drywall it can be quite heavy-this is not a one-handed operation. On this model, the hopper handle is bolted on at the top, which makes it a little uncomfortable to hold over long periods of time. The gun works with what the manufacturer refers to as a “four-finger grip”; in other words, you have to exert some pressure to make it work. (If you are worried about the comfort and ease of operation, you may want to shell out a little more money for Kraft’s Super-Pro system, which is a little easier to operate.)Note that the hopper is angled, which allows you to tilt the whole thing upward so you can spray ceilings. This is a ni… more >>

>>Read more about Kraft Tool PC501 Texture Gun with Hopper

CPT7110K Features & Benefits: -Powerful, yet economical for fast cutting action. -Includes (1) quick change retainer, (4) chisels, and heavy duty carrying case. -Vibration isolation system for smoother operation and greater comfort. -Unique cushioned exhaust deflector on barrel for comfort and control. -Touch trigger for precision start ups and total control.Kit includes (1) quick change retainer, (4) chisels, and heavy duty carrying case. Ideal for exhaust system work, bolt cutting, bushing driving, shearing and front end work.  Shank: .401. Average air consumption: 3.65 cfm.-Heavy Duty Air Hammer Kit.-Sets & Kits do not have warranty/ see individual pcs for details…. more >>

>>See Air Hammer Kit, Shock Reduced Tool W/Chisels & Qc other details

DYB18075 Features and Benefits: -Extension design is advantageous over conventional cut-off tools, allowing access to tight or confined areas. -Offers better visibility of workpiece, 20,000 RPM with rear exhaust. -Accepts standard 3″ (76mm) wheels with 3/8″ (10mm) center hole. -Comfortable composite handle insulates from cold air. -Plenty of power for everyday shop tasks. Tool design allows for easier straight-type cuts. Includes an adjustable guard. Carries a 1 Year Warranty. -3”” Long-Neck Cut-off Tool.-1 yr warranty on material and workmanship…. more >>

>>More about Extended Cut Off Tool

DYB18256 Features and Benefits: -Excellent power and torque at 3,200 RPM for removing rust etc.. -Dramatically outperforms conventional spiral-wound wire wheels without clogging. -Quick and easy accessory change. -Tool duplicates sand-blasting effect without surface fatigue and provides ultimate contour adaptation. -Straight line motor with rear exhaust. DynaZip Versatility Kit includes: 18255 DynaZip Tool, 92244 Coarse Wire Wheel (1/2″ wire bristle width x 3/4″ wide band), 92245 Coarse Wire Wheel (3/4″ wire bristle width x 3/4″ wide band), 92255 Eraser Wheel, 92284 Wheel Hub Assembly. Carries a 1 Year Warranty. -Dynazip Air Tool Kit.-1 yr warranty on material and workmanship…. more >>

>>More about Dyna Zip Metal Blaster Eraser Tool

APT2516 Features: -Cut-off tool. -Max speed: 18000 RPM. -Max pressure: 90 PSI. -1 Year warranty…. more >>

>>Other details about 3″ Cut-Off Tool

• Tool can access hard-to-reach holes
• Has a standard 1/4in.-28 threaded holder for included 100deg deburring bit

The Air Capital Deburring Tool utilizes the swivel action of the dogleg shaft to help quickly deburr holes, providing a smooth, tight fit for button-head and flush rivets…. more >>

>>Read more about Air Capital Deburring Tool with Dogleg Shaft, Model# 14031

• 6″ Diameter Neoprene Pad
• Maximum Speed: 10, 000 RPM
• Universal Fit for Dual Action Air Sanders with 5/16″ (24 UNF) Spindle Thread

MIT 6″ DUAL ACTION SANDING PAD features: * 6″ Diameter Neoprene Pad * Maximum Speed: 10, 000 RPM * Universal Fit for Dual Action Air Sanders with 5/16″ (24 UNF) Spindle Thread… more >>

Rating: (out of 1 reviews)

>>Other details about Michigan Industrial Tools MIT Tool 6″ Dual Action Sanding Pad

• Marks up to 20 holes at a time
• Can also be used to mark holes for nails, screws and bolts
• Stainless steel tool withstands countless openings, closings and adjustments

The Air Capital Rivet Fan Spacing Tool is an accordion-style spacer that can be spread to the desired distance, from 1/2in.-2in. apart (in 1/4in. increments), then used to mark spots to drill evenly spaced holes for rivets…. more >>

>>Find more about Air Capital Rivet Fan Spacing Tool, Model# 13061