Air Hand Tools

• Cup Capacity: One Quart. Nozzle Tip: 1. 8 mm. Fluid Inlet: 3/8″ NPS. Weight Gun & Cup: 1. 2 lbs.
• Air Consumption: 8. 5 to 12 CFM. Air Pressure: 30 to 70 PSI. Compressor Required: 1-1/2 HP.
• Design for spraying of all refinishing materials including varnishes, urethanes, stains, primers

Product Description
Cup Capacity: One Quart. Nozzle Tip: 1. 8 mm. Fluid Inlet: 3/8″ NPS. Weight Gun & Cup: 1. 2 lbs. Air Consumption: 8. 5 to 12 CFM. Air Pressure: 30 to 70 PSI. Compressor Required: 1-1/2 HP. Design for spraying of all refinishing materials including varnishes, urethanes, stains, primers, lacquers, enamels and acrylics…. More >>

Taylor Pneumatic: Spray Gun & No Drip Cup: 1 Qrt. Nozzle: 1. 8mm. 30 – 70PSI. Compressor: 1 -1/2HP

• Automatic Hammer: 90PSI. Air Inlet: 1/2″ NPT. Blows: 1000/min. L:8-5/16″
• Replaces mallet and hammer in close quarter situations. Installs dowel pins, screen spines
• Excellent for autobody panel bumping. Includes steel, aluminum and plastic tips.

Product Description
Automatic Hammer: 90PSI. Air Inlet: 1/2″ NPT. Blows: 1000/min. L:8-5/16″. Replaces mallet and hammer in close quarter situations. Installs dowel pins, screen spines and is excellent for autobody panel bumping. Includes steel, aluminum and plastic tips…. More >>

Taylor Pneumatic: Automatic Hammer: 90PSI. Air Inlet: 1/2″ NPT. Blows: 1000/min. L:8-5/16″

• Chipping Hammer: Shank .680 Bore-Stroke: 1-1/8×3. Blows: 1900/min. L:16-1/4″

Product Description
Chipping Hammer: Shank .680 Bore-Stroke: 1-1/8×3. Blows: 1900/min. L:16-1/4″… More >>

Taylor Pneumatic: Chipping Hammer: Shank .680 Bore-Stroke: 1-1/8×3. Blows: 1900/min. L:16-1/4″

• 1/2″ Reversible Drill: RPM: 500. Air: 90 PSI, Inlet: 1/4″ NPT Chuck 1/2″
• RPM: 500. Drill Chuck Size: 1/2″. Power .5HP Motor. Length: 8-3/4″. Weight: 3-1/2 lbs.
• Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI Max. Quality hardened gears. Rear exhaust.
• Variable speed. Lightweight aluminum handle. Convenient forward and reverse lever.
• This is the tool for those jobs requiring lots of torque and low speed.

Product Description
RPM: 500. Drill Chuck Size: 1/2″. Power .5HP Motor. Length: 8-3/4″. Weight: 3-1/2 lbs. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI Max. Quality hardened gears. Rear exhaust. Variable speed. Lightweight aluminum handle. Convenient forward and reverse lever. This is the tool for those jobs requiring lots of torque and low speed. T-7788HR comes complete with dead handle. Three gear planetary system is sturdy and reliable…. More >>

Taylor Pneumatic: 1/2″ Reversible Drill: RPM: 500. Air: 90 PSI, Inlet: 1/4″ NPT Chuck 1/2″

• Oscillations per minute: 20,000. Stroke Arc: 3 Degrees. Length: 4. 5″. Weight: 2. 7 lbs.
• Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI. Hose Size: 3/8″ ID. Build in regulator. Full 1/2 HP
• Multi positioning blade holder. Lightweight. A must for every glass shop.
• Cut encapsulated glass with ease. Double head bearing for trouble free service.

Product Description
Oscillations per minute: 20,000. Stroke Arc: 3 Degrees. Length: 4. 5″. Weight: 2. 2 lbs. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI. Hose Size: 3/8″ ID. Build in regulator. Full 1/2 HP motor. Multi positioning blade holder. Lightweight. A must for every glass shop. Our T-7838B is a quality tool at an affordable price…. More >>

Taylor Pneumatic: Economy Sealant Cutter/Scraper: Oscillations: 20,000 Air Inlet: 1/4″ NPT. 90PSI

• Model #: T-7712 :: RPM: 3600
• Length: 7.75 :: Height: 4 :: Weight: 3.4 lbs.
• Air Pressure 90 PSI Max.
• Wheel Size(771249) 4 x 1
• Rear Exhaust

Product Description
Remove decals with no damage to underlying paint. Only light pressure needed – reduce operator fatigue. No heat damage to metal, glass, fiberglass or wood. Fast and easy, reduce labor by over 60%…. More >>

Taylor Pneumatic: Decal Removal Tool

• 3/8″ Reversible Angle Drill: RPM: 1400. Air: 90 PSI, Inlet: 1/4″ NPT Chuck 3/8″
• RPM:1400. Drill Chuck Size: 3/8″. Power .5HP motor. Length: 8-1/4″. Weight: 2 lbs.
• Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI Max. Quality hardened gears. Rear exhaust.
• Variable speed. Angle head reaches into tight areas. Forward and reverse.
• Variable speed lever gives you precision speed control. Plenty of power for the tough jobs.

Product Description
RPM:1400. Drill Chuck Size: 3/8″. Power .5HP motor. Length: 8-1/4″. Weight: 2 lbs. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI Max. Quality hardened gears. Rear exhaust. Variable speed. Angle head reaches into tight areas. Forward and reverse. Perfect tool for working in confined areas. Variable speed lever gives you precision speed control. Plenty of power for the tough jobs…. More >>

Taylor Pneumatic: 3/8″ Reversible Angle Drill: RPM: 1400. Air: 90 PSI, Inlet: 1/4″ NPT Chuck 3/8″

• Capacity ( steel ): 18 gauge. RPM: 2200. Length: 8-1/4″. Weight: 3 lbs. Air Inlet: 1/4″ NPT.
• Air Pressure: 90 PSI. Cuts up to 18 gauge sheet metal. Lightweight, easy to maneuver.
• 3 gear planetary gear system. Head rotates 360 degrees. Ideal for sheetmetal and bodyshops.
• Make distortion free cuts w/ the T-7700 & T-7701. The blades shear the material giving a clean cut.
• A 1/4′ strip of material is removed by the cutting action or can be used to trim one edge.

Product Description
Capacity ( steel ): 18 gauge. RPM: 2200. Length: 8-1/4″. Weight: 3 lbs. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI. Cuts up to 18 gauge sheet metal. Lightweight, easy to maneuver. 3 gear planetary gear system. Head rotates 360 degrees. Ideal for sheet metal and bodyshops. Make distortion free cuts with the T-7700 and T-7701. The blades shear the material giving a clean cut. A 1/4′ strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw and head rotates 360 degrees…. More >>

Taylor Pneumatic: Heavy Duty Metal Shear: 18 gauge. RPM: 2200. Air Inlet: 1/4″ NPT. 90PSI

• 1/4″ Extended Die Grinder – RPM: 25,000. Air Inlet: 1/4″ NPT. 90 PSI. Wt: 1-1/4 lbs.
• RPM: 25,000. Collet size: 1/4″. Length: 10-1/4″. Weight: 1-1/4 lbs. Air Inlet: 1/4″ NPT.
• Air Pressure: 90 PSI Max. Direct Drive. Rear Exhaust. Full ball bearing construction.
• The extended design allows you to reach deep into areas that would be impossible with other tools.

Product Description
RPM: 25,000. Collet size: 1/4″. Length: 10-1/4″. Weight: 1-1/4 lbs. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI Max. Direct Drive. Rear Exhaust. Full ball bearing construction. Powerful .25 HP motor. The extended design allows you to reach deep into areas that would be impossible with other tools…. More >>

Taylor Pneumatic: 1/4″ Extended Die Grinder – RPM: 25,000. Air Inlet:1/4″ NPT. 90PSI. Wt: 1-1/4 lbs.

• Punch Size: 3/16″. Length: 10″. Weight: 1-1/4 lbs. Tool Diameter: 2-1/4″. Air Inlet: 1/4″ NPT.
• Air Pressure: 90 PSI. Heads swivel 360 degrees. Lightweight. Crimps up to 14 guage steel.
• Tool steel punch and punch guide. This tool is a must for every sheet metal and body shop.

Product Description
Punch Size: 3/16″. Length: 10″. Weight: 1-1/4 lbs. Tool Diameter: 2-1/4″. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI. Heads swivel 360 degrees. Lightweight. Crimps up to 14 gauge steel. Tool steel punch and punch guide. This tool is a must for every sheet metal and body shop…. More >>

Taylor Pneumatic: 3/16″ Punch/Flange: Air Inlet: 1/4″ NPT. 90PSI. swivel 360 degrees