Air Hand Tools

• .401 Rivet Hammer: 90PSI. Bore-Stroke: 1/2″ x 3-1/16″. Blows: 1700/min. L:8-5/16″
• Extra sensitive teasing throttle. Lightweight aluminum handle.
• Hardened tool steel pistons and steel alloy cylinder for long life.
• Spool valve for slow heavy blows needed to drive rivets.
• Tool available with Gooseneck or Straight handles.

Product Description
.401 Rivet Hammer: 90PSI. Bore-Stroke: 1/2″ x 3-1/16″. Blows: 1700/min. L:8-5/16″. Extra sensitive teasing throttle. Lightweight aluminum handle. Hardened tool steel pistons and steel alloy cylinder for long life. Spool valve for slow heavy blows needed to drive rivets. Tool available with Gooseneck or Straight handles. Add G to model # for Gooseneck or and S for Straight…. More >>

Taylor Pneumatic: .401 Rivet Hammer: 90PSI. Bore-Stroke: 1/2″ x 3-1/16″. Blows: 1700/min. L:8-5/16″

• Bolt Capacity: 1-1/4″. Square Drive: 1″. RPM: 4000. Max. Torque: 1800 ft. lbs. Length: 19-3/4″.
• Weight: 22 lbs. Air Inlet: 1/2″ NPT. Air Pressure: 90 PSI Max. 1800 ft. lbs. of torque.
• Extended Anvil. Side handles. Rubber scuff guards. Convenient forward and reverse location.
• Quality construction. The T-7796 is design for toughest jobs.
• Rugged and powerful for working on heavy duty trucks, front end loaders, spring work.

Product Description
Bolt Capacity: 1-1/4″. Square Drive: 1″. RPM: 4000. Max. Torque: 1800 ft. lbs. Length: 19-3/4″. Weight: 22 lbs. Air Inlet: 1/2″ NPT. Air Pressure: 90 PSI Max. 1800 ft. lbs. of torque. Extended Anvil. Side handles. Rubber scuff guards. Convenient forward and reverse location. Quality construction. The T-7796 is design for toughest jobs. Rugged and powerful for working on heavy duty trucks, front end loaders, spring work and were high torque is needed…. More >>

Taylor Pneumatic: 1″ Heavy Duty Impact 6″ Ext: Belt:1. 25″ Sq. Dr. 1″. 90PSI. Torque: 1800 ft lb.

• Cup Capacity: One Quart. Nozzle Tip: 1. 8 mm. Fluid Inlet: 3/8″ NPS. Weight Gun & Cup: 1. 2 lbs.
• Air Consumption: 8. 5 to 12 CFM. Air Pressure: 30 to 70 PSI. Compressor Required: 1-1/2 HP.
• Design for spraying of all refinishing materials including varnishes, urethanes, stains, primers

Product Description
Cup Capacity: One Quart. Nozzle Tip: 1. 8 mm. Fluid Inlet: 3/8″ NPS. Weight Gun & Cup: 1. 2 lbs. Air Consumption: 8. 5 to 12 CFM. Air Pressure: 30 to 70 PSI. Compressor Required: 1-1/2 HP. Design for spraying of all refinishing materials including varnishes, urethanes, stains, primers, lacquers, enamels and acrylics…. More >>

Taylor Pneumatic: Spray Gun & No Drip Cup: 1 Qrt. Nozzle: 1. 8mm. 30 – 70PSI. Compressor: 1 -1/2HP

• Automatic Hammer: 90PSI. Air Inlet: 1/2″ NPT. Blows: 1000/min. L:8-5/16″
• Replaces mallet and hammer in close quarter situations. Installs dowel pins, screen spines
• Excellent for autobody panel bumping. Includes steel, aluminum and plastic tips.

Product Description
Automatic Hammer: 90PSI. Air Inlet: 1/2″ NPT. Blows: 1000/min. L:8-5/16″. Replaces mallet and hammer in close quarter situations. Installs dowel pins, screen spines and is excellent for autobody panel bumping. Includes steel, aluminum and plastic tips…. More >>

Taylor Pneumatic: Automatic Hammer: 90PSI. Air Inlet: 1/2″ NPT. Blows: 1000/min. L:8-5/16″

• Chipping Hammer: Shank .680 Bore-Stroke: 1-1/8×3. Blows: 1900/min. L:16-1/4″

Product Description
Chipping Hammer: Shank .680 Bore-Stroke: 1-1/8×3. Blows: 1900/min. L:16-1/4″… More >>

Taylor Pneumatic: Chipping Hammer: Shank .680 Bore-Stroke: 1-1/8×3. Blows: 1900/min. L:16-1/4″

• 1/2″ Reversible Drill: RPM: 500. Air: 90 PSI, Inlet: 1/4″ NPT Chuck 1/2″
• RPM: 500. Drill Chuck Size: 1/2″. Power .5HP Motor. Length: 8-3/4″. Weight: 3-1/2 lbs.
• Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI Max. Quality hardened gears. Rear exhaust.
• Variable speed. Lightweight aluminum handle. Convenient forward and reverse lever.
• This is the tool for those jobs requiring lots of torque and low speed.

Product Description
RPM: 500. Drill Chuck Size: 1/2″. Power .5HP Motor. Length: 8-3/4″. Weight: 3-1/2 lbs. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI Max. Quality hardened gears. Rear exhaust. Variable speed. Lightweight aluminum handle. Convenient forward and reverse lever. This is the tool for those jobs requiring lots of torque and low speed. T-7788HR comes complete with dead handle. Three gear planetary system is sturdy and reliable…. More >>

Taylor Pneumatic: 1/2″ Reversible Drill: RPM: 500. Air: 90 PSI, Inlet: 1/4″ NPT Chuck 1/2″

• Oscillations per minute: 20,000. Stroke Arc: 3 Degrees. Length: 4. 5″. Weight: 2. 7 lbs.
• Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI. Hose Size: 3/8″ ID. Build in regulator. Full 1/2 HP
• Multi positioning blade holder. Lightweight. A must for every glass shop.
• Cut encapsulated glass with ease. Double head bearing for trouble free service.

Product Description
Oscillations per minute: 20,000. Stroke Arc: 3 Degrees. Length: 4. 5″. Weight: 2. 2 lbs. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI. Hose Size: 3/8″ ID. Build in regulator. Full 1/2 HP motor. Multi positioning blade holder. Lightweight. A must for every glass shop. Our T-7838B is a quality tool at an affordable price…. More >>

Taylor Pneumatic: Economy Sealant Cutter/Scraper: Oscillations: 20,000 Air Inlet: 1/4″ NPT. 90PSI

• Model #: T-7712 :: RPM: 3600
• Length: 7.75 :: Height: 4 :: Weight: 3.4 lbs.
• Air Pressure 90 PSI Max.
• Wheel Size(771249) 4 x 1
• Rear Exhaust

Product Description
Remove decals with no damage to underlying paint. Only light pressure needed – reduce operator fatigue. No heat damage to metal, glass, fiberglass or wood. Fast and easy, reduce labor by over 60%…. More >>

Taylor Pneumatic: Decal Removal Tool

• 3/8″ Reversible Angle Drill: RPM: 1400. Air: 90 PSI, Inlet: 1/4″ NPT Chuck 3/8″
• RPM:1400. Drill Chuck Size: 3/8″. Power .5HP motor. Length: 8-1/4″. Weight: 2 lbs.
• Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI Max. Quality hardened gears. Rear exhaust.
• Variable speed. Angle head reaches into tight areas. Forward and reverse.
• Variable speed lever gives you precision speed control. Plenty of power for the tough jobs.

Product Description
RPM:1400. Drill Chuck Size: 3/8″. Power .5HP motor. Length: 8-1/4″. Weight: 2 lbs. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI Max. Quality hardened gears. Rear exhaust. Variable speed. Angle head reaches into tight areas. Forward and reverse. Perfect tool for working in confined areas. Variable speed lever gives you precision speed control. Plenty of power for the tough jobs…. More >>

Taylor Pneumatic: 3/8″ Reversible Angle Drill: RPM: 1400. Air: 90 PSI, Inlet: 1/4″ NPT Chuck 3/8″

• Capacity ( steel ): 18 gauge. RPM: 2200. Length: 8-1/4″. Weight: 3 lbs. Air Inlet: 1/4″ NPT.
• Air Pressure: 90 PSI. Cuts up to 18 gauge sheet metal. Lightweight, easy to maneuver.
• 3 gear planetary gear system. Head rotates 360 degrees. Ideal for sheetmetal and bodyshops.
• Make distortion free cuts w/ the T-7700 & T-7701. The blades shear the material giving a clean cut.
• A 1/4′ strip of material is removed by the cutting action or can be used to trim one edge.

Product Description
Capacity ( steel ): 18 gauge. RPM: 2200. Length: 8-1/4″. Weight: 3 lbs. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI. Cuts up to 18 gauge sheet metal. Lightweight, easy to maneuver. 3 gear planetary gear system. Head rotates 360 degrees. Ideal for sheet metal and bodyshops. Make distortion free cuts with the T-7700 and T-7701. The blades shear the material giving a clean cut. A 1/4′ strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw and head rotates 360 degrees…. More >>

Taylor Pneumatic: Heavy Duty Metal Shear: 18 gauge. RPM: 2200. Air Inlet: 1/4″ NPT. 90PSI