Air Hand Tools

• Perfect for Airbrushing

Features 2.6 C.F.M (free air). Economical and suitable for all airbrushes spraying properly thinned fluids. It is capable of delivering 35 to 40 P.S.I. maximum pressure. The Paasche D500 is an oilless diaphragm unit and comes with a grounded six foot long 3 wire cord. It operates on 115 volt, 1 phase, 60 cycle, 1/10 H.P., 3 amps and delivers .5 C.F.M. @ 20 P.S.I. Not CSA approved or UL listed. It comes with a R75AR Regulator (.50 value) (with filter and gauge) which will regulate up to 30 P.S.I. depending on usage (intermittent or constant) and size of airbrush being used…. more >>

>>More about Paasche D500SR Air Compressor with Switch & Regulator

• Heavy Duty Cnstruction

HVLP Air Spray Gun Gravity Feed * Combination of Gravity Feed Design & HVLP Technology * Stainless Steel Needle & Fluid Tip * Includes Air Regulator & 20 oz. Paint Cup… more >>

>>Read more about Pro-Grade HVLP Gravity Feed Spray Gun w/ Regulator

• 1.7 mm Nozzle Stailness Steel Nozzle
• One Quart Plastic Cup
• Anodized Aluminum Body
• Includes air micrometer/ regulator

Our HVLP, High Volume Low Pressure spray gun has high transfer efficiency, creating an ultra fine mist and a wide spray pattern for maximum control and speed with reduced operating costs. Our HVLP spray gun features: * Gravity type feed * Stepless jet width control that adjusts spray pattern from 12″ wide fan to 2″ round * Air regulator with gauge provides smooth consistent air flow * 1.7 mm fluid orifice * Stainless steel nozzle * Aluminum alloy body construction * 380 liter per minute air consumption * 200-220 M/min material output * 15-43 psi required * .6 liter (600cc) cup capacity * 1/4″ NPS connection * For use with 1 HP or larger air compressor * Ergonomically designed pistol grip for maximum control and comfort * Includes filter, brush, spanner and socket spanner * Colors may vary… more >>

>>More about HVLP Air Spray Paint Gun w/ Gauge Regulator Compressor

• PERFECT FOR REGULATING YOUR AIR PRESSURE!
• Air Inlet: 1/4″ NPT
• Outlet: 1/4″ FPT
• Thumb screw type

Product Description
Used on most pneumatic tools( spray guns, nail guns, air wrenches, air brushes, etc.) to adjust differences in pressures. Gauge reads air pressure from 0 to 160lbs… More >>

Smith 30 Series Co2 Regulator

• 1/4fx1/4m inln regulator
• To regulate air pressure to air tools from full flow to complete shut-off
• Use as shut-off valve for air and noncorrosive liquids
• 1/4″ Female NPT x 1/4″ Male NPT.

Product Description
To regulate air pressure to air tools from full flow to complete shut off. Use as shut off valve for air and noncorrosive liquids. 1 4″ Female NPT x 1 4″ Male NPT…. More >>

Milton Ind/INCOM S-638-1 In-Line Air Flow Regulator

• Sold Individually

Product Description
Item #: SHA3310. Spray Gun Accessories. High Volume Air Regulator With Gauge HVLP.
Customers also search for: Discount Air Adjusting Regulator w/Gauge 0 160psi 36AAV HV, Buy Air Adjusting Regulator w/Gauge 0 160psi 36AAV HV, Wholesale Air Adjusting Regulator w/Gauge 0 160psi 36AAV HV, 755652503682, ToolWeb, Shop Air Supplies… More >>

Air Adjusting Regulator w/Gauge 0 160psi 36AAV HV Category: Shop Air Supplies

• 3/8″ pressure regulator
• Employs solid piston, balanced poppet for excellent performance, longer life
• Port size is 3/8″ NPTF
• 2-gauge parts provided, 1 pressure gauge included
• Maximum operating pressures are 250 P.S.I. primary, 2 to 125 P.S.I. secondary. 65 SCFM with 100 P.S.

Product Description
Employs solid piston, balanced poppet for excellent performance, longer life. Port size is 3 8″ NPTF. 2 gauge parts provided, 1 pressure gauge included. Maximum operating pressures are 250 P.S.I. primary, 2 to 125 P.S.I. secondary. 65 SCFM with 100 P.S.I…. More >>

Plews/Lubrimatic 24-414 Air Line Regulator

Product Description
Features and Benefits: Three regulated outlets, one main line outlet (bypass) Includes air gauge (GA-160) and 1-HC-1885 air cock (1/4″ M.P.T.) Capacity 50 CFM … More >>

Sharpe Manufacturing Air Regulator 50CFM 3 1/4in.Out 3/8in.In Gauge

Product Description
UPC: 794685828607

Thumb screw type, Air Inlet: 1/4″ NPT, Air Outlet: 1/4″ FPT. Used on most pneumatic tools to adjust differences in pressures…. More >>

Air Regulator w/Gauge

• Flow Rate: 20 SCFM
• Port Size: 1/4″ NPT
• Gauge Port: 1/8″ NPT
• Control knob with lock ring
• Gauge and bracket included

Product Description
Air Locker WR1135LG Combo Regulator Lubricator. Regulator has 25 micron replaceable filter. Light weight aluminum body. Control knob with lock ring. Includes pressure gauge and bracket. Ready to install…. More >>

Air Locker WR1135LG 1/4 Inch 2 Piece Regulator Lubricator Combo