Hitachi NR90AE Round Head 2-Inch to 3-1/2-Inch Framing Nailer
- Round-head 2- to 3-1/2-inch framing nailer with selective actuation switch (sequential or bump) for convenience
- 70-120 psi operating pressure; simple tool-free depth adjustment; vibration isolation pads mounted on nose
- 2-piece anodized aluminum magazine, comfortable non-slip rubber grip
- Comes with safety glasses
- Lightweight and well-balanced at 7.5-pounds; 5-year warranty
Amazon.com Review
Hitachi’s superior design and engineering make this a top-of-the-list choice for a framing nailer, just as hardworking as the NR83 model that preceded it, but with a few major improvements. We like the way Hitachi’s integrated both types of trigger, so there’s no need to replace anything – just flip the lever on the tool down for bump or up for sequential firing. Also tool-free is the depth-of-fire adjustment: Just turn a small knob to set your depth. It’s even easier than adjusting the air pressure. This nailer has a 21-degree angled magazine and fires nails from 2 inches to 3-1/2 inches, a wider range than the old NR83 handled. Loading is much faster and easier on this gun, too, because Hitachi’s redesign repositioned the loading mechanism at the rear of the magazine. A maximum of 64 plastic-strip collated full round head nails will fit in the magazine, but reloading takes a few seconds, so there’s no downside to that. This is one of the most jam-free… More >>
Hitachi NR90AE Round Head 2-Inch to 3-1/2-Inch Framing Nailer