Air Hand Tools

• Lightweight design for less operator fatigue; easy load magazine for less downtime and more productivity
• Quick-clear jam release increases user efficiency
• Depth of drive adjustment, to countersink or flush drive staples
• Includes safety glasses and 4mm hex bar wrench
• 4.4 pounds; 5-year warranty

For such a light gun, this one really gets the job done. It’s just a bit more than 4 pounds, but it feels even lighter than that in hand because, we assume, of Hitachi’s famous design and engineering. Equipped with a contact trip mechanism, it fires as fast as you can go, but you can pick up the optional sequential trigger if you need it. The magazine holds a robust 150 staples, and that means less downtime for reloading. We like the open magazine design, because you can see at just a glance if you’re running low on fasteners. Not that we’ve ever fired blanks… We couldn’t get this gun to jam, but the clearing process is fast and simple: Just release the lock latch, open the blade guide, free the jam with a screwdriver and close the latch. Done. There’s a nice clean depth-of-drive adjustment, but it isn’t tool-free, so users may prefer controlling that with air pressure. It’s a hardworking, trouble-free, rugged gun that will last for years.–Kris Jensen-Van HesteThe Hitachi N5008AC 7… more >>

Rating: (out of 8 reviews)

>>Read more about Hitachi N5008AC 1-Inch to 2-Inch 7/16-Inch Medium Crown 16 Gauge Stapler

• Lightweight design for less operator fatigue; easy load magazine for less downtime and more productivity
• Quick-clear jam release increases user efficiency
• Depth of drive adjustment, to countersink or flush drive staples
• Includes safety glasses and 4mm hex bar wrench
• Top load magazine for fast and easy loading

N5008AC2 The N5008AC Construction Stapler is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction and making wooden boxes and expendable pallets. Features: -4.4 lbs, lightweight and well balanced for easy maneuverability. -Exhaust muffler reduces noise pollution. -High capacity magazine holds 150 staples allowing for fewer replenishments. -Open magazine design allows users to quickly check staple quantity. -Quick-clear jam release increases user efficiency. -Plastic magazine with stainless steel plating adds durability. -Depth of drive adjustment, to countersink or flush drive staples. -Long-lasting rubber grip, for added comfort. -Optional accessory: Single Trip Trigger Mechanism. Includes: -Safety Glasses. -Hex Bar Wrench…. more >>

>>Other details about Hitachi N5008AC2 2″ 16 Gauge Standard 7/16-Inch Crown Construction Stapler

• 2″
• 15 guage finish nails
• Bright
• 4m Count
• Fits NT65MA & NT65MA2

Hitachi 14305 2″ x 15 Gauge Angled Finish Nails Smooth Bright 4000 count… more >>

>>Read more about Hitachi 14305 2-Inch x 15 Guage Finish Nail

• 2 1/2″
• 16 guage finish nails
• 2.5m count
• Bright
• Fits NT65A,NT65A2,NT65A3

Hitachi 14206 2-1/2″ x 16 Gauge Straight Finish Nails Smooth Bright 2500 count… more >>

>>Other details about Hitachi 14206 2-1/2-Inch by 16 Gauge Bright Finish Nail (2,500 per Box)

• 2 1/2″ x.092 RG
• Plastic Sheet
• Electro Galv
• 3.6m Count
• Fits NV65AH & NV75AG

Hitachi 13340 2-1/2″ x 0.092″ Electro Galvanized Ring Shank Wire Coil Siding Nails 3600 Count… more >>

>>See Hitachi 13340 2-1/2-Inch x .092 Ring Electro Galvanized Coil Nails other details

• 1 1/4″
• 18 guage
• 5m count
• Electro Galv
• Fits NT50AE

Hitachi 14106 1-1/4″ x 18 Gauge Electro Galvanized Brad Nails 5000 Count… more >>

Rating: (out of 1 reviews)

>>More about Hitachi 14106 1-1/4-Inch x 18 Gauge Finish Nail

• New short magazine
• Easy to use fastener placement
• Lightweight at 5.5 lbs.
• 1-1/2″ to 2-1/2″ Length x .148 .162 daimeter fasteners
• Tool-less adjustment for different fastener lengths

Most narrow design in class allows for use in tight spaces. Overhanging nail tip accurately locates pre-punched holes. Sequential firing mechanism ensures precision nail placement. 360 degree tool-less adjustable exhaust deflector, paper strip collation.
STANDARD EQUIPMENT: safety glasses, 3 wrenches

SPECIFICATIONS: Accepts fasteners sizes 1-1/2″ – 2-1/2″ x .131″ – .162″. Rear loading magazine has a collation angle of 36 degrees and can hold 44 nails (2 strips). Operating air pressure of 80-120 PSI. 3/8″ Air Inlet. Dimensions 11-3/4″ x 3-3/8″ x 13-3/16″…. more >>

Rating: (out of 5 reviews)

>>See Hitachi NR65AKS Strap-Tite 1-1/2-Inch to 2-1/2-Inch Positive Placement Nailer with Short Magazine other details

• 9 cfm at 100 psi
• Honda GX160 engine
• 5.5 hp
• Oil sight glass
• Pneumatic tire

Solid cast iron cylinder, consistent compression and low oil carryover. Baseplate integrated control panel protects gauge, regulator and plumbing while centralizing the controls for simple operation. Oversized oil level site glass allows everyone to monit or the oil level for the pump avoiding pump damage due to lock up from inadequate oil supply. Pneumatic throttle control uses air instead of a cable to adjust the throttle eliminating common failure of cable throttles due to crimping and breaking. Full-si ze 3/8″ locking regulator comes pre-installed. Comfortable and convenient ball valve tank drain. STANDARD EQUIPMENT: No.885483 Freezer plug. SPECIFICATIONS: 5.5 HP, 1-1/2 gallon, 9 CFM AT 100 PSI, 116-145 PSI, baseplate contro… more >>

>>Other details about Hitachi EC2510E 5.5-Horsepower Gas Oiled Twin Pontoon Compressor

• Powerful, lightweight, and well balanced nailer for roofing applications
• Adjustable depth of drive; bottom load magazine
• Lightweight and well-balanced
• Includes safety glasses, (2) hex bar wrenches (3 and 4 mm)
• Weighs 5.7 pounds; 5-year warranty

Steel and rubber body protectors. Tool-less depth of drive adjustment for precision nailing. Carbide tipped push lever with cylinder valve firing mechanism. Rubber safety valve covering resists dirt and tar.

STANDARD EQUIPMENT: Eye protection, Allen wrenches for M4 and M5 screws.

SPECIFICATIONS: Coil, Wire Collation 7/8″ – 1 3/4″ x .120. Nail capacity of 120 nails. Operating air pressure of 70-120 PSI. Air consumption of .046 ft. cubed per cycle at 100 PSI. 3/8″ Air Inlet. Dimensions 9-27/32″ x 4-5/8″ x 10-3/8″ with 3/4″ NPT thread. Fires all standard roofing nails ranging in size from 7/8″ to 1-3/4″.This tool’s daddy, the NV45AB, was a fine piece of machinery, but Hitachi took it back to the drawing board and after a few significant improvements, put this NV45AB2 coil roofing nailer on the market, where it collected awards and praise from all corners. Deserved, we think. There’s no more fiddling on the roof because the depth of drive adjustment is tool-free… more >>

Rating: (out of 2 reviews)

>>Read more about Hitachi NV45AB2S 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer

• 2-inches in length
• 18-gauge with 5m count
• Includes 5,000 nails per box
• Electro-galvanized construction
• Fits Hitachi NT50AE model

18 GA. GALVANIZED BRAD NAILS – 18 gauge electro-galvanized brad nails ~ Chisel point ~ Fits Hitachi: NT45A NT50AD NT32AE NT50AE ~ 5 000 nails per box… more >>

>>Other details about Hitachi 14108 2-Inch by 18-Gauge Brad Nail, 5000 per Box