Air Hand Tools

• 8 Gallon tank, 150 max psi, 9.0 scfm Pump delivers the surge air power and recovery needed to run extra nailers over standard 8 gallon
• DEWALT 196-cubic centimeters, OHV engine with low oil shut off for engine protection
• Long life cast iron pump with exclusive low oil shut off device prevents lock ups due to lack of lubrication
• Forced-air cooling allows the pump to run more efficiently and produce higher SCFM
• Low profile design allows for easy maneuverability Large 10 (254-milimeter) non-flat tire for improved job site mobility and reliability

Featuring a more efficient design that uses less oil and reduces down-time, the D55672 from DEWALT is made to use with pumps that produce 150 max PSI for extended tool running time. Boasting a 6.5 HP engine that operates the W-pump at 9.0 SCFM at 100 PSI, this eight-gallon compressor has an innovative forced air cooling system that allows the pump to function at a temperature 100 degrees cooler than older models. Three-piece oil control rings cut down on the oil the D55672 uses, and a built-in low-oil indicator will cut the engine if the level reaches a too-low point, helping to reduce “freezing up” due to insufficient lubrication. For added convenience, the D55672 features a generously sized, 10-inch tire so you can easily take it with you from site to site…. more >>

>>Read more about DEWALT D55672 6.5 HP 150 PSI 8 Gallon Gas Wheeled Portable Compressor

• 8 Gallon tank, 150 max psi, 9.0 scfm Pump delivers the surge air power and recovery needed to run extra nailers over standard 8 gallon
• DEWALT 196-cubic centimeters, OHV engine with low oil shut off for engine protection
• Long life cast iron pump with exclusive low oil shut off device prevents lock ups due to lack of lubrication
• Forced-air cooling allows the pump to run more efficiently and produce higher SCFM
• Low profile design allows for easy maneuverability Large 10 (254-milimeter) non-flat tire for improved job site mobility and reliability

Featuring a more efficient design that uses less oil and reduces down-time, the D55672 from DEWALT is made to use with pumps that produce 150 max PSI for extended tool running time. Boasting a 6.5 HP engine that operates the W-pump at 9.0 SCFM at 100 PSI, this eight-gallon compressor has an innovative forced air cooling system that allows the pump to function at a temperature 100 degrees cooler than older models. Three-piece oil control rings cut down on the oil the D55672 uses, and a built-in low-oil indicator will cut the engine if the level reaches a too-low point, helping to reduce “freezing up” due to insufficient lubrication. For added convenience, the D55672 features a generously sized, 10-inch tire so you can easily take it with you from site to site…. more >>

>>Find more about DEWALT D55672 6.5 HP 150 PSI 8 Gallon Gas Wheeled Portable Compressor

The DeWalt D55273 is a Factory Reconditioned Heavy-Duty 10.5 Gallon Gas Wheeled Portable Compressor. The DeWalt Compressor has an all new, long life cast iron oil lube pump that produces 10.3 SCFM at 100 PSI and a large 10.5 gallon tank with 150 Max PSI tank pressure, increasing surge air supply. The high air delivery and increased surge supply provides users with the ability to add two additional framing nailers or one additional roofing nailer allowing contractors to operate a total of seven framing nailers or three roofing nailers from a single compressor at the same time. The pump of the DeWalt D55273R is also designed with patent pending low oil shut-off to prevent the pump from continuing to operate without a sufficient amount of oil. The DeWalt Air Compressor  is equipped with a one-hand push/pull handle and two 12 inch non-flat, semi pneumatic tires giving the user an enhanced 3.6 inch ground clearance and the ability to easily navigate any rugged jobsite terrain.   Featu… more >>

>>Other details about DeWalt D55273R Factory Reconditioned 10.5-Gallon Gas Wheeled Portable

When pneumatic tools first became popular, we thought that was pretty much the best innovation ever. Now that’s what we’re saying about the finish nailer in this great combo kit, because it combines the ultimate power of pneumatics with the unparalleled convenience of cordless technology. This 16-gauge nailer packs in the absolute best of both worlds, giving you the ease of air-powered nailing but the freedom of cordless tools: no compressor, no hoses, no electricity, no generator. And the best part is that you sacrifice nothing for all the gains. This nailer gives you both sequential firing for exact placement as well as a bump-fire mode that shoots as fast as you can go. We like the six-position dial that lets you move between workpieces without having to adjust the exact depth setting. Loading nails is fast and easy as can be, and the angled magazine holds 110 20-degree nails. Should you experience a jam, clearing it is quick and tool-free. Perhaps the greatest innovation is the… more >>

>>Other details about DEWALT Heavy Duty DC618HA XRP 18V 16 GA 20 Degree Angled Finish Nailer / 1/2-Inch Cordless Hammerdrill Drill/Driver Combo Kit

• 10.5 Gallon (39.7L) Tank, 150 Max PSI, 10.5 SCFM Pump delivers the surge air power and recovery needed to run extra nailers over standard 8 gallon (30.2L)
• DEWALT 6.5 hp, OHV engine with low oil shut off for engine protection
• Long life cast Iron Pump with exclusive low oil shut off device prevents lock ups due to lack of lubrication
• Forced-air cooling allows the pump to run more efficiently and produce higher SCFM
• Roll cage and control panel provide protection to key compressor components; One hand push/pull handle for ease of mobility on the jobsite

Includes 6.5 HP Wheeled Portable Gas Compressor – D55684… more >>

>>Other details about DEWALT D55684 196CC 6.5 Hp, 150 PSI, 10.5 Gallon Compressor with Roll Cage

Heavy Duty 15 Gauge DA” Finish NailApplications:Includes:Heavy Duty 15 Gauge DA” Finish NailFeatures:15 gauge angled finish nail (1-1/2″) provides greatest holding power for heavy trim applications… more >>

Rating: (out of 1 reviews)

>>Other details about DEWALT DCA15150 15GA 1 1/2-Inch Angled Nail (4,000 per pack)

• 4.0 CFM delivered at 90 PSI pump provides rapid recovery
• Oil lubricated pump improves durability
• Cast iron cylinder enhances pump life
• 10-inch pneumatic wheel and handle kit for ease of mobility
• Top load panel with positioning holes allows unit to transport loads up to 100 lbs; High-flow regulator for increased performance

Whether your crew is laying down roofing, finishing up a framing project, or putting trim in place to complete a big start-to-finish construction job, the oil-lubricated DeWalt D55154 Heavy-Duty Electric Air Compressor offers convenience and dependable performance. Continuous power provided by the 1.1 HP induction motor delivers 4.0 SCFM at 90 PSI and 125 PSI Max. Combined with two conveniently placed universal quick couplers that make it easy to run several tools at the same time, this output ensures that multi-person woodworking crews won’t be disappointed by this four-gallon compressor. For increased efficiency, the compressor features an oil pump that has been rotated 90 degrees to make oil changes quick, and it offers a convenient ball drain valve that makes thorough tank draining a simple task. Because professional craftsmen and women know how important it is the have tools that are both durable and easy to handle, this compressor features a unique wheeled dolly-style and a sturd… more >>

Rating: (out of 1 reviews)

>>See DEWALT D55154 1.1 HP Continuous 4 Gal Electric Wheeled Dolly-Style Air Compressor with Panel other details

No compressor. No hoses. No kidding. And no sacrifices in speed or power, either. There’s absolutely no comparison between this performer and the fuel-cell powered competition, which we thought was a great innovation. But there’s no costly fuel cell to replace on this tool—-just pop on a recharged XRP battery and get back on the job. The only difference you’ll feel between this and a traditional pneumatic is that you’re not tethered to an air hose. It’s just as fast and fires just as powerfully into both soft and hard joints. We love that you can choose bump or sequential mode for precision or speed, something most nailers don’t offer, and the integrated headlight is another impressive addition, really lighting up your workpiece even in the worst conditions. There’s a fantastic six-position numbered dial to reference your depths, so you can move easily between, for example, baseboard and crown molding without struggling to reset the depth. DeWalt’s covered what would have been our ma… more >>

Rating: (out of 1 reviews)

>>Other details about DEWALT DC614KN 12/14.4-Volt 16-Gauge 20-Degree Angled Finish Nailer (no battery/no charger)

• 7.5 Gallon (28.4L) Tank, 175 Max PSI, 4.6 SCFM Pump enables more nails to be fired and provides quicker recovery (*Tested per ISO1217)
• Durable 2-Stage Sealed Lube Pump provides extended maintenance free operation without oil contamination
• Automotive style air intake filter protects pump from jobsite dirt and other contaminants
• 1.6 HP Continuous*, 120/240V 1725 RPM, 4 ûPole Capacitor Start Motor provides long life and quieter 73 dBA** operation (*Tested per ISO1217)(**Tested per ISO3744)

Includes 1.5 HP Electric Wheeled Portable Compressor w/ DV and DC – D55371, 3/8″ NPT Pressure Regulator… more >>

>>See DeWalt D55371 Heavy Duty 1.6 Hp Continuous, 175 PSI, 7.5 Gallon Compressor with Dual Voltage and Dual Control other details

• Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Straight magazine, accepts 18 gauge nails ranging in legths from 5/8-inch to 2-inch
• Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
• Part of the XRP DEWALT Cordless system

18 Gauge, 2" Cordless Nailer (Tool Only) Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard jointsSequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Straight magazine, accepts 18 gauge nails ranging in legths from 5/8" to 2"Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenchesPart of the XRP DEWALT® Cordless systemContact Trip Lock-Off allows trigger to be disabled when not in useIntegrated LED lights for long life and durabilityTop cap is impact resistant and easy to remove for troubleshootingProvides increased portability and versatility on the job-site.Increased visibility and durability along with protection for work-surface from the contact-trip.12 position dial allows the user to move between applications without having to re-acquire exact depth settingFully enclosed… more >>

>>See Bare-Tool DeWalt DC608B Heavy Duty 18V Cordless 2-Inch 18 Gauge Brad Nailer (Tool Only, No Battery) other details