Air Hand Tools

• Bostitch caps for use with the SB150SLBC-1 Cap Stapler and N66BC-1 Cap Nailer
• 1-Inch plastic caps eliminate pull-through when installing felt, house wrap and foam board insulation
• The cap method proves to be 10 times faster than nailing by hand
• Comes in quantity of 1,000
• Backed by 7-year limited warranty

Product Description
1″ caps and staples for use with Bostitch cap stapler model No. SB150SLBC 1. Caps and staples eliminate pull through when installing felt, house wrap, and foam board installation. Uses wider 5 16″ crown, 18 gauge staples for superior fastening to work sur… More >>

Bostitch SBCAPS 1000 Caps for Cap Stapler and Nailer

• Durable pneumatic floor nailer with 100 cleat magazine
• Compatible with L-shaped cleat nails from 1-1/2 to 2 inches
• 70-100 PSI operating pressure
• Measures 20-1/2 inches high and 17-1/2 inches long; It weighs 11-1/2 pounds
• Includes mallet, oil, wrenches, and 1/4-inch air fitting with dust cover

Amazon.com Product Description
The Porter-Cable FCN200 Two-Inch Flooring Cleat Nailer drives 1-1/2 to 2-inch cleat nails quickly and efficiently. Durable and built to last, this nailer features a 100-cleat, rear-load, gravity-feed magazine with bypass pusher, and it has a well-balanced, stable design for dependable results in both traditional and engineered hardwoods.
The Porter-Cable FCN200 Two-Inch Flooring Cleat Nailer
At a Glance:Drives L-shaped cleats from 1.5 inches to 2 inchesPneumatic driving action of 70-100 PSIStrong, lightweight aluminum housingErgonomic designNo assembly required

Durable, lightweight aluminum construction is heavy-duty without sacrificing comfort.Balanced, Ergonomic, and Powerful
The FCN200 features a balanced, ergonomic design, and it stands upright for easy, stable use. It also has a low center of gravity that allows it to stand independently without falling over.And because the FCN200 is made from durable, l… More >>

Porter-Cable FCN200 Pneumatic Flooring Cleat Nailer

• 1-1/4-inch to 2-1/2-inch cordless 16-gauge gas angled finish nailer with non-mar tip and sight lines
• Depth-of-drive wheel with probe position-indicator; locks tool at 10 nails to prevent blank firing
• Comfortable in sure grip-inch and soft trigger
• Includes nailer, battery, 2-hour charger
• 11-1/2 by 10-3/4 by 3-1/4-inches; 4.9-pounds with battery; 5-year warranty

Product Description
When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tool’s yellow fuel cell.

Not just cordless – Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode IM250A Factory Reconditioned Finish Nailer is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.9 pounds. It’s able to drive 1-1/4″ to 2-1/2″ fasteners with ease. Tight spots and corners are no problem for the slim, angled design of the Paslode IM250A. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability -… More >>

Paslode Cordless 16-gauge Angled Finish Nailer no. 900600

• 18-gauge brad nailer fires brads 3/4 to 2 inches in length
• Operates at 60-100 psi with a 1/4-inch NPT air inlet fitting
• Rubber-wrapped handle; quick-release for jam-clearing; aluminum body
• Magazine holds 100 brads; includes oil, wrenches, and custom case
• Tool weighs 5.4 pounds

Amazon.com Product Description
The 18-gauge brad nailer from WEN fires 18-gauge brads 3/4 to 2 inches in length. It features an adjustable exhaust deflector, a rubber-wrapped handle, a quick-release for jam-clearing, an aluminum body, and a magazine window that shows the remaining brad count. The magazine holds 100 brads, and the tool operates at 60-100 psi with a 1/4-inch NPT air inlet fitting. This kit includes oil, adjusting wrenches, and a custom carrying case…. More >>

WEN 61720 3/4-Inch to 2-Inch 18 Gauge Brad Nailer

• 1-Inch Length
• Chisel Point
• Coated Finish
• 1000 Brads Per Box
• For Use in the Bostitch BT200K-2 Industrial Brad Nailer

Product Description
1,000 Pack, 1″ 18 Gauge, Brads, Used In Most Brad Tools…. More >>

Bostitch BT1309B-1M 1-Inch 18-Gauge Brads, 1000 per Box

• Factory reconditioned kit includes 2-1/2 In. 16 gauge finish nailer, 1 In. 18 gauge finish stapler, 1-1/4 In. 18 gauge brad nailer
• Includes factory reconditioned CAP60P-OF 2.0 HP (Peak) oil-free compressor
• Includes a contractor’s canvas tool bag
• 1-Year Limited Warranty

Product Description
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes…. More >>

Factory-Reconditioned Bostitch U/CPACK3 3-Tool Compressor Combo Kit

• Light weight die-cast aluminum body. 2 in 1 Flooring Cleat Nailer / Stapler. Colors may differ!
• Operates with any standard compressor using pressure of 60 to 100 psi.
• High-capacity magazine reduces reload time. Precisely drives staples at proper angle and depth.
• Non-marring adjustable base plates allows for 1/2 to 3/4 inch hardwood floor installation.
• We currently ONLY ship these TOOLS inside USA via fedex ground.

Product Description
Our high-speed hardwood flooring,  2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1″ to 2″  length L-shaped cleat nails or staples on flooring thickness 1/2″, 5/8″, 3/4″, or 25/32″.
Technical Information:
Minimum Operating Air Pressure: 60 PSI 4 bar
Maximum Operating Air Pressure: 100 PSI 7 bar
Staple Length Range: 1″ – 2″ 25.4 mm-50.8 mm
Staple Size: 16 Guage

Staple Capacity :92

L-shaped Nail Length Range:1-1/2″ – 2″  38.1 mm-50.8 mm
L-shaped Nail Size: 15-1/2
L-shaped Nail Capacity:100

Air Inlet:1/4 inch NPT 6.35 mm
Air Consumption:4.5 CFM 4.5 CFM

Package Includes:
Carrying Case
2 in 1 Flooring Cleat Nailer / Stapler
Mallet
Safety Glasses
Air Tool Oil
Base Plate
S3 Hex Key
S4 Hex Key
S5 Hex Key
Wrench-Special
Instruction  Manual… More >>

Hardcore Tools® Pneumatic 2 in 1 Flooring Cleat Nailer / Stapler HARDWOOD FLOORING 1-1/2-Inch to 2-Inch

• 1-inch to 2-1/2-inch 15-gauge oil-free angled finish nailer
• Tool-free removable and angled magazine; adjustable depth control; bypass nail pusher
• Durable, lightweight magnesium housing
• Durable plastic carrying case
• 11.63 by 3.13-inches; extremely light 3.8-pounds; 7-year limited warranty

Product Description
This is a factory reconditioned tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. Includes 2-1/2″ 15-Gauge Oil-Free Angled Finish Nailer Kit – U/N62FN, Carrying CaseAmazon.com Review
This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. The first time you pick up the Bostitch N62FNK-2, you might wonder if such a lightweight finish nailer (it weighs just 3.8 pounds, the lightest in its class) can really get the job done. But once you pull the trigger and feel the 400 in./lbs. of driving power at your fingertips, those doubts will disappear and you’ll wonder how you ever did without it before. Rugged and sturdy enough for virtually any application, the N62FNK-2 deliv… More >>

Factory-Reconditioned Bostitch U/N62FNK-2 1- to 2-1/2-inch 15-gauge Angled Finish Nailer

• Professional touch trigger for total control
• Long-life tool with a tough one piece alloy barrel
• Easy to maintain, with an “easy out” throttle valve assembly
• Kit includes: a blow molded plastic case with a removable lid and 6 chisels
• Air hammer comes in a blowmolded case with 6 chisels

Product Description
This Ingersoll Rand air hammer makes fast work of body panel crimping and cutting, bushing driving, shearing and front end work. Blows Per Minute (BPM): 3,000, Air Consumption (CFM): 3, Stroke Length (in.): 2 29/32, Bore Diameter (in.): 3/4, Shank Diameter (in.): 0.401, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Chisels Included: Yes, Case Included: Yes… More >>

Ingersoll Rand 121K6 Super Duty Air Hammer with 6-Piece Chisel Kit

• Porter-Cable palm nailer kit handles nails from 1-1/4- to 6-1/2-inch in size
• Ergonomic glove design accepts a wide range of nails
• Features 4 separate tips for added versatility
• Includes magnetic tip, non-marring finish tip, wide nail tip, hammer head tip, 1/4-inch air fitting with dust cover, oil, wrench, and carrying case
• Measures 4-1/2 inches tall and five inches long; weighs just 2-1/2 pounds

Amazon.com Product Description
The Porter-Cable PN650 Palm Nailer Kit is a versatile pneumatic nail gun with a comfortable design and magnetic tip. This nailer will accept 1-1/4 to 6-1/2 inch nails (3d to 70d), and it comes with four different nose tips, including finishing tip, magnetic tip, wide nail tip, and steel hammer tip. Don’t worry about driving the nail too deep, the PN650 features depth-of-drive control to make sure the nail gets set correctly. The nailer operates at 50-120 PSI and features a multi-blow firing mode–2,300 BPM at 100 PSI…. More >>

Porter-Cable PN650 Palm Nailer Kit