Air Hand Tools

• Offset Round Head
• 31-Degree
• Smooth Shank
• Full Round Head Offset To Fit Clipped Head Nailers

Interchange 10686 2400 Count, 3″ x .130, Smooth Shank, Paper Tape Collated, Clipped Head Framing Nail, Fits The Following Nail Guns: Senco Sn325+, Sniv, Sn70, Fp600, Fp650, Hitachi Nr83aa, Nr83aa2, Nr83aa3, Dewalt D51823, D51822, D51825, Paslode 5300 Series, F350s, Im325ct, Im350, Porter Cable Fc350, Bosch Sn350-34C, B&C Eagle Sn3490, Bostitch F33pt, Rigid R350cha, Milwaukee 7110-20 & Most Other 31 To 34 Degree Paper Tape Collated Nailers…. more >>

>>Find more about Interchange 10686 3″ X .120 Brite Offset Round Head Framing Nail 2,500 Per Box

• Primesource #GRS8D 2500CT 2-3/8x.113 Nail
• PRIMESOURCE BLDG PRODUCTS

28 nails for use with Bostitch model No. N80SB, N86S, N16, N70S, N70SB, N100S, Atro model No. CHS928, Campbell Hausfeld model No. N52890, Devilbiss model No. SFN6, and Craftsman model No. 18420X. Hot dipped galvanized or stainless steel nails are designed for pressure-treated lumber. Wire weld. No. GRS6D: 2″ long, .113 gauge, bright finish, plain shank, 2500 nails per box No. GRS6DRHG: 2″ long, .113 gauge, hot dipped galvanized, ring shank, 2500 nails per box No. GRS8D: 2-3/8″ long, .113 gauge, bright finish, plain shank, 2500 nails per box No. GRS8DR: 2-3/8″ long, .113 gauge, bright finish, ring shank, 2500 nails per box No. GRS8DHG: 2-3/8″ long, .113 gauge, hot dipped galvanized, smooth shank, 2000 nails per box, Available Only At Waco, Lexington. No. GRS8DRSS: 2-3/8″ long, .113 gauge, stainless steel, ring shank, 2500 nails per box No. GRS10D: 3″ long, .120 gauge, bright finish, plain shank, 2000 nails per box No. GRS10DZ: 3″ long, .131 gauge, bright finish, smooth shank, 2000 nails… more >>

>>Read more about Offset Full Round Head Nails

B46H90 Handle is not Included on the Trowel Features: -46” Honda GX270 B – Series Trowel. -Plus complete product service support for trowel’s life. -Fully enclosed belt guard. -Access panel provides quick access to trowel arms and blades. -Includes lifting eye as standard equipment. -Optimal balance for smooth finishing. -Handle is not included on the trowel.. Specifications: -Item # B46H90. -Engine Make / Model: Honda GX-270. -Start Method: Recoil. -Engine Power: 8 HP. -Engine RPM: 3600. -Fuel Type: Gasoline. -Clutch Type: Centrifugal. -No. of Blades: 4. -Ring Diameter: 46”. -Rotor Speed: 60-130 RPM. -Handle Options: STHAJB, QPHAJB. -Overall Dimensions: 75” L x 46” W x 41” H. -Operating Weight: 242 lbs. -Shipping Weight: 292 lbs. -One year limited warranty. -Weight: 275 lbs…. more >>

>>Other details about 46″ Honda GX270 B – Series Trowel

• .050 in. wire
• 9/16 in legs
• For use with Black & Decker, Sears Craftsman & Duo Fast Staplers

1000 Box, 9-1/16″ Ceiling Tile Staples, For Desa Powerfast Swingline 800, 900, 1000, 31600, & 31800…. more >>

>>Read more about 1000BX Ceil Tile Staple

1 1/4″ 15GA ANGLE BRAD NAILS (4M)… more >>

>>See Grizzly G6085 15 ga. Galv. Angle Finish Nails – 1-1/4″, 4,000 pc. other details

• 5HP electric motor
• Extended drain at base
• 18.5 CFM at 100 PSI
• 60-gallon vertical tank
• Heavy duty belt guard; high performance

Rugged Cast Iron Cylinders Built to work hard and last a long time “V” Design Minimiz…… more >>

>>Find more about Eagle C5160V1 60-Gallon 150 PSI max Electric Compressor

• If You have the right tools You can complete any job!
• We have 8 warehouses in the U.S. so you will get your order Fast!
• Warehouse Locations:

  Cape Girardeau,MO

  Medina,OH

  Lexington,SC

  Montgomery,NY

  Dixon,IL

  Waco,TS

  Woodburn,OR

  Mesquite,NV.

Senco 2-1/2 X 14Ga Galvanized Finish Nail UA25EAB… more >>

>>Read more about Senco 2-1/2 X 14Ga Galvanized Finish Nail 3100 per box

D81011 Size: 4″ x 10 Segment x 5/8″ Thread -CST36 Cup Grinding Wheel. -Use for fast, aggressive removal of concrete, stone and masonry materials. -Can be used wet or dry and leaves minimal swirl marks. -Use CST36 for longer life and soft abrasive material. -Other sizes: 4” L x 10 segments x 5/8” W-11 thread, 5” L x 14 segments x 5/8” W-11 thread, 7” L x 12 segments x 7/8” W-5/8”, 7” L x 12 segments x 5/8” W-11 thread, 7” L x 18 segments x 7/8” W-5/8”, 7” L x 18 segments x 5/8” W-11 thread, 7” L x 24 segments x 7/8” W-5/8”, and 7” L x 24 segments x 5/8” W-11 thread. -Super premium. -Dimensions : 4” L x 10 segments x 7/8” W-5/8”…. more >>

>>Read more about CST36 Cup Grinding Wheel Size: 4″ x 10 Segment x 5/8″ Thread

• 1100 ft/lbs torque
• Weighs only 9-Pound
• Hard hitting double hammer
• High energy 6 vane motor
• The extension makes it easier to get the tool in hard to reach places

3/4″-6″ Ext Super Duty Impact Wrench 1100 ft. lb. Torque Weighs Only 9.0 lbs Hard Hitting Twin Hammer High Energy 6 Vane Motor Combined Power Management/Reverse Switch Comfort Handle Grip Combination Through Hole ; Friction Ring Anvil 18.00 L. 11.00 W. 5.00 H…. more >>

>>Other details about Florida Pneumatic FP-777L 3/4-Inch to 6-Inch Extension Super Duty Impact Wrench

• “STALLION” NAIL
• 1 lb Box.
• Size 10d.
• Length 3″
• Bright finish

“STALLION” NAIL

1 lb Box.
Size 10d.
Length 3″
Bright finish
Quantity per Pound 124
Used on interior finish carpentry and trim.
Cupped brad head, smooth shank, and diamond point.
Small head allows for countersinking below wood surface
for later filling to give smooth finished appearance…. more >>

>>Read more about STALLION 10F1 “BRAD HEAD” NAIL 3″ PK/25