Air Hand Tools

• Small tank size for easy portability and storage
• Easy to read gauges allow for easy monitoring of air pressure
• Scoop handle makes the unit easy to carry anywhere
• Perfect for inflation, stapling, air brushing

Includes 3-Gallon Horizontal Air Compressor -FP209400RB, 25 Foot Recoil Hose, Inflation Needle, Inflation Adapter, (2) Inflation Nozzles… more >>

Rating: (out of 5 reviews)

>>More about Campbell hausfeld 3-Gallon Horizontal Air Compressor FP209400RB

• With adjustable depth control you are able to control the depth of drive in various types of wood.
• Easily change the direction of air exhaust away from the project with an adjustable exhaust.
• Quick clear nose allows you to quickly remove nail jams to reduce downtime.
• Non-marring tip will not dent the work surface.

1-1/4″, 18 Gauge Brad Nailer, For Molding, Decorative Trim, Window Casings, Furniture Trim, Crafts & Picture Frame Assembly, Quick Cear Nose, Adjustable Exhaust, Non Marring Tip, Adjustable Depth Control Requires .8 CFM @ 90 PSI, Kit Includes: Nailer, Nails, 2 Allen Wrenches, Nailer Oil, Carry Case…. more >>

Rating: (out of 4 reviews)

>>Read more about Campbell Hausfeld CHN10199 3/8-Inch to 1-1/4-Inch 18 Gauge Brad Nailer

• 2-1/2″ Length
• 15 Gauge
• Galvanized
• 3000 Nails per Package

For use with SENCO models FinishPro®41XP, FinishPro®35, SFN40, SFN30, SFN1, SFN2B, SN1. Also Works with Competitors models DeWALT D51275K – HITACHI NT65MA2, NT65AA – PORTER CABLE DA250B, DA250A – Accuset 250FN – Airy ATH-0565T – Campbell Hausfeld NB35666, NB356500 – Craftsman 18432, 18329 – DuoFast DAFN-6480 – Fasco F3C-BA-5-65, R3C BA-5065 – Max NF550 – Spotnails KBA1564, XBA1564…. more >>

>>Read more about Senco DA25EAB 2-1/2″ Galvanized 15-Gauge Angled Finish Nails – 3000 per Package

• Dynamic 7 amp, 1.5 HP electric motor supplies 6.5 cfm at 100 psi for speedy recuperation
• Expect lasting dependability with Emglo?s twin cylinder, cast iron, oil lubricated pump
• Fully drain your tank with the fast and complete ball drain valve
• On/off continual run feature decreases the chance of tripping the breaker
• Convenient onsite transport with low profile construction and pneumatic tires

Power your pneumatic tools with this handy, yet dynamic 4.7 amp, 1.5 horsepower dual-tank compressor. This compressor features an innovative motor that supplies 6.5 cfm at 100 psi, providing a speedy recuperation and Emglo’s demonstrated dependable twin cylinder, cast iron, oil lubricated pump. Designed with rugged pneumatic tires and low-profile construction, this unit is convenient to transport on the job. Other innovative features include fast and complete drainage with the ball drain valve and to on/off continual run feature, which decreases the chance of tripping the breaker…. more >>

Rating: (out of 1 reviews)

>>See DEWALT D55170 7.5-Amp 1-1/2-Horsepower 8-Gallon Wheeled Oiled Twin Pontoon Compressor other details

• 1/4″ Leg Length
• 1/2″ Crown Width
• 20 gauge wire size
• 1000 staples per box
• For Use With CS-5000 and HT-550

Duo-Fast CP5008C 1/4″ Length x 1/2″ Crown 20 Gauge Staples 1000 per Pack (1015272)… more >>

>>Other details about Duo-Fast CP5008C 1/4″ Length x 1/2″ Crown 20 Gauge Staples 1000 per Pack (1015272)

• Lightweight design for less operator fatigue; easy load magazine for less downtime and more productivity
• Quick-clear jam release increases user efficiency
• Depth of drive adjustment, to countersink or flush drive staples
• Includes safety glasses and 4mm hex bar wrench
• Top load magazine for fast and easy loading

N5008AC2 The N5008AC Construction Stapler is used for construction work such as wall sheathing, roof decking, subflooring, mobile and modular home construction and making wooden boxes and expendable pallets. Features: -4.4 lbs, lightweight and well balanced for easy maneuverability. -Exhaust muffler reduces noise pollution. -High capacity magazine holds 150 staples allowing for fewer replenishments. -Open magazine design allows users to quickly check staple quantity. -Quick-clear jam release increases user efficiency. -Plastic magazine with stainless steel plating adds durability. -Depth of drive adjustment, to countersink or flush drive staples. -Long-lasting rubber grip, for added comfort. -Optional accessory: Single Trip Trigger Mechanism. Includes: -Safety Glasses. -Hex Bar Wrench…. more >>

>>Other details about Hitachi N5008AC2 2″ 16 Gauge Standard 7/16-Inch Crown Construction Stapler

• 1-1/4-inch finish nails
• 16 gauge
• 2,500 per pack

B & C Eagle, 2,500 Count, 1-1/4″ Galvanized Straight Finish Nail, 16 Gauge, Fits The Following Nail Guns: Hitachi NT65A, NT65A2, NT65A3, NT65M, Paslode MU212, 3250F16, Duofast LFN764, Porter Cable FN200, FN250A, FN250B, CFN250, Senco FP32, Bostitch SB1664FN, FN16250K, Dewalt D51256K, DC612KA, DC616KA, Ridgid R250SFA, Milwaukee 7145-21…. more >>

Rating: (out of 1 reviews)

>>Other details about B & C Eagle B16-114 1-1/4-Inch by 16 Gauge Galvanized Finish Brad Nail (2,500 per Box)

• Fewer jams
• Engineered to fit other manufacturers tools
• More completed drives
• Highest withdrawal values
• Less broken collation

18 gauge. 1 4″ crown. Galvanized staples. For use in: Craft assembly, picture frames, toy building, casebacks, shelving, soffits, fascia, cabinets, drawer building, and light aluminum to wood. For use in AccuSet model No. A100LS and A150L; Senco model No…. more >>

Rating: (out of 1 reviews)

>>See Senco A800759 18 Gauge by 1/4-inch Crown by 3/4-inch Leg Electro Galvanized Staples (900 per box) other details

The T72 staple gun features all steel construction, a cushioned grip, a removable wire guide and jam-proof mechanism with easy squeeze double leverage operation. It will shoot large insulated staples and is ideal for installing non-metallic sheathed cable… more >>

>>More about Arrow T-72 Staple gun for insulated staples

• Compact and lightweight design
• High speed for better efficiency- 22,000 rpm
• Ergonomic, insulated and adjustable arm
• Good to use for sanding in confirmed areas, on contours, and rugged surfaces

Features and Benefits: 22,000 RPM for faster material removal Adjustable arm and belt pivot for hard to reach areas Insulated comfort shaped handle with non-slip rubber grip .35 HP motor; lightweight and compact Quick, easy belt changeThis sander features a compact and lightweight design. It is good to use for sanding in confined areas, on contours, and rugged surfaces. Belt size: 3/8″ x 13″. Tool length: 12″, tool weight: 1.98 lbs…. more >>

>>Other details about Chicago Pneumatic CP7858 Belt Sander – 3/8-Inch Belt