Air Hand Tools

• FREE SHIPPING!
• Rated the QUIETEST in the Industry
• Compressor comes wired 230 Volts and can easily be changed in the field to 208V or 460V
• No valve rework, replacing valve strips or replacing bearings or rods
• 100% continuous duty (even when fully loaded)

Quiet Rotary Screw (QRS) compressors are designed with the automotive aftermarket in mind, making them ideal for paint and body shops, tire shops, dealer service shops and general maintenance and repair shops. This compressor requires less maintenance than air-cooled reciprocating compressors, is easy to install, quiet (less than 65dB), fully packaged and wired. Can be installed anywhere by a qualified electrician – no separate room is needed. Equipped with sound-attenuating enclosures and 60-gallon ASME horizontal tank. Includes a TEFC motor, adjustable V-belt drive, full voltage motor starter, auto start/stop, moisture drain, safety shutdown, air shutoff valve and safety relief valves. U.S.A. CFM at 90 PSI: 22.04, Max. PSI: 150, Volts: 208/230/460, Amps: 21.5/19.5/9.9, HP: 7.5, Air Tank Size (gal.): 60, Tank Description: Horizontal, Pump: Rotary Screw, Oil Injected, Air Cooled, Belt-Driven, Air Outlet Size (in.): 1/2, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 56… more >>

>>Find more about - Chicago Pneumatic Quiet Rotary Screw Air Compressor – 7.5 HP, 230 Volts, 3 Phase, Model# QRS7.5HP

Senco 3″ X.148 Smooth Shank Full Round Head Galvanized Joist Hanger Nail MD27APBSN… more >>

>>Find more about Senco MD27APBSN 3″ X.148 Smooth Shank Full Round Head Galvanized Joist Hanger Nail

Outfit your work truck with a gas-powered Campbell Hausfeld Service Truck Series air compressor. Ideal for fleet service trucks, welding/mechanic’s trucks, or worksite locations without electric power. Includes ACME-certified tank, pilot valve, throttle control, electric start and alternator charging system. U.S.A. Max. PSI: 200, Air Tank Size (gal.): 30, Tank Description: Horizontal, Pump: 2-stage, Engine: Honda GX390, HP: 13, Start Type: Electric, Portable or Stationary: Stationary, Dimensions L x W x H (in.): 25 x 49 1/2 x 53… more >>

>>Other details about - Campbell Hausfeld Service Truck Series Air Compressor – 13 HP Honda GX390 Engine, 24.3 CFM @ 175 PSI, Model# CE7003

• 3/4-Inch-by-22-Inch belt sander
• Swivel action 180-degree
• High performance pneumatic motor works wonders on aluminum, steel, iron, plastic, plywood and stone
• 16,000 RPM
• Inlet 1/4-Inch, recommended pressure 90 PSI

3/8″-13″ Belt Sander Head rotates 180 degrees for operating convenience and comfort Variable speed throttle for positive control Integral belt tracking keeps sanding belt in placeBest for: Light grinding, sanding and deburring 18.00 L. 6.00 W. 5.00 H…. more >>

>>Other details about Florida Pneumatic UT8703-1 Belt Sander, 3/4-Inch by 22-Inch

This Electric Stationary Air Compressor is proudly made in Somerset, PA USA. It features a powder coated ASME certified tank, thermal overload motor protection, industrial/commercial grade UL listed electric motors and auto start/stop control with pressure unloader set at 145-175 PSI. This 60 Gallon 3 HP Stationary Air Compressor comes equipped with pressure relief safety valves, a tank gauge and is belt driven with a large flywheel for extra cooling and easier start-up. This Jenny Two Stage Electric Stationary Air Compressor comes splash lubricated with a limited 2-year warranty and filled with Jenny Synthetic Blue Compressor Pump Oil. Features: Heavy-duty two stage cast iron compressor pump Splash lubricated Auto start/stop Control with pressure unloader set at 145-175 PSI Industrial/Commercial grade UL listed electric motor Thermal overload motor protection Oil Sight Glass Belt driven with a large flywheel for extra cooling and easier start-up Unit comes filled with Jenny Synthetic … more >>

>>See W3B – 60 – Jenny Products 60 Gallon 3 HP Two Stage Electric Stationary Air other details

• 20 gauge
• 250 foot Length
• 1-1/4″ Width
• Zinc galvanized finish containing 0.90oz of zinc per square foot of surface area (total both sides)

CS are continuous utility straps which can be cut to length on the job site…. more >>

>>Find more about Simpson Strong Tie CS20 Coiled Strapping – 20 Gauge, 250 Feet

• Fits Bostitch Tool model #H2B Stapling Hammer
• 5800 Pack
• 7/16″ Crown
• 1/4″ Leg Length

Spring crown design puts staple legs under tension for superior driving power. Use in Bostitch tacker No. H2B. Bulk packed 5000 staples per pack. No. SHCR50191 4 5.8M: 1 4″, 3 8″ crown No. SHCR50193 8 5M: 3 8″, 3 8″ crown… more >>

>>Read more about Stanley Bostitch SHCR50191/4-5.8M Power Crown Staples

• 1/2″ Impact Wrench Hammer and Anvil Kit for use with 235

235-THK1 Features: -1/2” Impact Wrench Hammer and Anvil Kit. -For Use On IR Model 235…. more >>

>>See Ingersoll-Rand 235-THK Pnuematic Impact Wrench Tune-Up Kit other details

Galvanized Ring nails conform are made with double hot dipped galvanized, are corrosion resistant, can be used on pressure treated lumber and are great for boat building… more >>

>>See Galvanized Ring Nails NGLR16D 16d 9 Gauge x 3-1/2 in Long 54/lb other details

1 9/16″ 18GA BRAD NAILS GALV (5M)… more >>

>>More about Grizzly G6074 18 Gauge Galv. Brad Nails – 1-9/16″, 5,000 pc.