Air Hand Tools

VT7500 Features: -Positive blade retention delivers increased blade life. -Adjustable guard guide allows operator to set depth of cut. -Kick-off throttle and built-in regulator for positive speed control. -High performance motor provides aggressive cutting action, 5000 strokes per minute. -Rear exhaust, equipped with a built-in silencer for reduced noise. -Light weight, slim design for cutting in con?ned areas. -Safety throttle speed lever. -5000 RPM. -4 CFM@90PSI. -3/8” Stroke. -16 Gauge metal capacity. -45 Vibration…. more >>

>>Find more about Reciprocating Air Saw and File

• 1,600 ft lbs or maximum torque
• The side handle adjust to suit the operator
• 6,000 rpm

This Ingersoll Rand air impact wrench provides the brute force needed to handle tough jobs. U.S.A. Drive (in.): 1, Average Air Consumption (CFM): 10, CFM at Load: 55, Speed – No Load (RPM): 6,000, Blows Per Minute (BPM): 750, Max. Torque (ft.-lbs.): 1,600, Working Torque (ft.-lb.): 150 – 1,000, Inlet Size (in.): 1/2, Min. Hose Size (in.): 1/2, Standard Bolt Capacity (in.): 1 1/4, Tool Length (in.): 13… more >>

>>See Ingersoll-Rand 280 Super Duty 1-Inch Pnuematic Impact Wrench other details

• 1″
• 1″ Crown
• 10m Count
• 16 Guage
• Fits N5024A

Hitachi 11302 1″ x 16 Gauge 1″ Wide Crown Roofing Staples 10000 count… more >>

>>Read more about Hitachi 11302 1-Inch x 1-Inch 16 Gauge Staple

AT01101P-1 Features: -Air compressor. -Brush motor, oil free, direct drive. -2 Gallon pancake tank. -Working pressure: 70-100 PSI. -1.0 CFM 40 PSI, 0.7 CFM 90 PSI. -Super quiet. -Built-in handle for easy carrying. -No assembly required. -Dimensions: 14.75” H x 14” W x 11.5” D…. more >>

>>More about 1 Gallon Pancake Air Compressor

• Coarse thread (high low thread)
• Gray Phosphate coating
• nibs under the head for easier countersink
• Trim head
• For use in Quik Drive Pro 200 and Pro 200S

Coarse (high low) threaded screws for underlayment
nibs under the head for countersink
trim headed… more >>

>>More about Quik Drive MTH114S

• 100% cast iron construction
• 1-pc. connecting rod
• Splash lubrication
• Finned copper intercooler
• Extended 2-year warranty on the pump when you use start-up kit #1592008

Ingersoll Rand’s legendary Type-30 air compressors have been providing unsurpassed performance in the most demanding applications for over 75 years. The Type-30 compressors are recognized as the industry’s benchmark for quality, power and reliability – that’s why they remain the world’s best-selling reciprocating compressor. Whether you’re a small shop owner, auto body or repair business owner, or work in a demanding industrial environment, there is a Type-30 air compressor that will meet your needs. Note: Compressor ships as 230V with parts to configure to 460V. Warranty on the pump extends to 2 years with the use of appropriate start-up kit (see below). U.S.A. Package Type: Standard, Volts: 460, Motor Phase(s): 3, HP: 7.5, Max. PSI: 175, CFM at 175 PSI: 24, Tank Type: Vertical, Stage: Two, Drive: Belt, Air Outlet Size (in.): 3/4, Air Tank Size (gal.): 80, After-Cooler Included: No, Drain System: Manual, Portable or Stationary: Stationary, Pump: V-Block, cast iron, splash lubricated, … more >>

>>Read more about - Ingersoll Rand Type-30 Reciprocating Air Compressor – 7.5 HP, 460 Volt 3 Phase, Model# 2475N7.5-V

• 3/8″ tacker staples
• Same as Stanley Bostitch STCR5019 staples
• Contractor pack, 5000
• 3/8″

Same as Stanley Bostitch STCR5019 staples. Contractor pack, 5000. No. FB6: 1 4″ No. FB10: 3 8″… more >>

>>Find more about 3-G Supply GRSTCR38 Hammer Tacker Staples

• kit includes the V361 Mini Die Grinder and durable blow-molded carrying case for easy storage.
• 1 – V361 Mini Size Die Grinder, 1 – V509 1 oz. Pneumatic Oil, 1 – 70074 Stone, 1 – 70075 Stone
• 1 – 90516 Carbide Burr, 1 – 90519 Carbide Burr, 1 – 90520 Carbide Burr, 1 – 90521 Carbide Burr

Mini Die Grinder Kit The Viking Mini Die Grinder V361 features 22,000 rpm performance. Small and light-weight for easy access to confined work areas. 1/4″ collet. Made in USA. Kit contains V362 die grinder, 2 stones, 4 burrs, 2 wrenches, 1 oz. of pneumatic oil, and molded case…. more >>

>>More about Mini Die Grinder Kit

• Fit the following Arrow staple and/or nail guns: T50, T50PBN, T55, ET50, ET50BN and ET50PBN
• 1,250 staples per Package
• .050 wire
• 3/8″ crown width
• 5/16″ leg length

Arrow’s T50 5/16-inch staples are made of .050 wire with a 3/8-inch crown and 5/16-inch leg length. They come 1,250 to a pack…. more >>

>>Read more about 4 Pack Arrow Fastener 505 T50 5/16″ Flat Crown Heavy Duty Steel Staples 1250 per Package

• Senco #N21BAB 10000CT 2″ Galvanized Staple
• SENCO FASTENING SYSTEMS
• More completed drives
• Highest withdrawal values
• Less broken collation

10,000 Pack, 7/16″ Crown x 2′ Galvanized Staples, Fits Senco SKS-N, SNS40, SNS45, SNS50, Use For Sheathing, Subflooring, Roof Decking, Subcomponents Lathing, Window Units Cedar Shingles, Furring Fascia & Soffits, Vinyl Siding…. more >>

>>See Senco #N21BAB 10000CT 2″ Galvanized Staple other details