Bostitch S6D-FH 28 Degree 2-Inch by .113-Inch Wire Weld Framing Nails (2,000 per Box)

21Y87KsTmiL. SL160  Bostitch S6D FH 28 Degree 2 Inch by .113 Inch Wire Weld Framing Nails (2,000 per Box)

  • Full Roundhead 2″ x .113″ 28 Degree Wire Collated Framing Nail
  • Coated finish eases penetration resistance and increases holding power.
  • Smooth shank geometry delivers acceptable withdrawal capacity when extra holding power is not required.
  • 2,000 per Box
  • Works in: F28WW, N88WWB, N79WW, N80SB

Plain shank nails (28). For use in Bostitch pneumatic nailers model No. N16, N80SB 1, N70S, N86S, N88WW 1, N100S, F28WW, Atro model No. CHS928, Campbell Hausfield model No. N52890, Devilbiss model No. SFN6, and Craftsman model No. 18420X. No. S6D FH: 2″ l… more >>

>>Read more about Bostitch S6D-FH 28 Degree 2-Inch by .113-Inch Wire Weld Framing Nails (2,000 per Box)


Chicago Pneumatic CP734H 1/2-Inch Drive Heavy-Duty Air Impact Wrench

41dOnK ARUL. SL160  Chicago Pneumatic CP734H 1/2 Inch Drive Heavy Duty Air Impact Wrench

  • Dyna-Pact oil bath clutch delivers smooth operation
  • One hand push-button forward/reverse
  • 4 positive power settings; full power in reverse
  • Handle exhaust directs air away from the workpiece and operator
  • 360-degree air inlet swivel keeps air hose from being twisted and kinked

This Chicago Pneumatic 1/2in. heavy-duty air impact wrench with Dyna-Pact oil bath clutch to deliver smooth operation and extended durability. Delivers power and economy for general repair, transmission work, exhaust systems and body shops. Drive (in.): 1/2, Average Air Consumption (CFM): 3, CFM at Load: 15, Speed – No Load (RPM): 8400, Max. Torque (ft.-lbs.): 425, Working Torque (ft.-lb.): 25 – 280, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Standard Bolt Capacity (in.): 9/16, Variable Speed: Yes, Tool Length (in.): 7, Tool Weight (lbs.): 5.2… more >>

Rating: 4 5 Chicago Pneumatic CP734H 1/2 Inch Drive Heavy Duty Air Impact Wrench (out of 3 reviews)

>>Find more about Chicago Pneumatic CP734H 1/2-Inch Drive Heavy-Duty Air Impact Wrench


Bostitch F33PT 33-Degree Paper Tape Framing Nailer / Metal Connector Nailer

41J044B6JVL. SL160  Bostitch F33PT 33 Degree Paper Tape Framing Nailer / Metal Connector Nailer

  • Drives 2- to 3-1/2-inch paper tape collated framing nails and 1-1/2- to 3-1/2-inch paper tape metal connector nails
  • Metal connector capability includes interchangeable tip for use on joist hangers, hurricane straps, etc
  • 1050-inches-per-pound of driving power for tough engineered lumber applications
  • Includes 2 quick change nosepieces to convert tool to either framing or metal connector applications
  • Lightweight magnesium design for added durability

Framing, siding, decking, installing metal connectors, attaching wood to masonry, driving big nails into hard engineered lumber–you name it–this versatile and lightweight framing nailer from Bostitch does it all. Two nailers in one, this framing gun includes two quick-change nosepieces to convert the tool for either framing or metal connector applications. A factory installed sequential trigger and Bostitch’s exclusive Smart Trigger ensure optimal control and faster production.Operating in either bump- or sequential-fire modes, the tool’s lightweight magnesium housing means easy handling and unsurpassed durability. Weighing just 7.9 pounds, the tool handles great in tight quarters like attics and during otherwise shoulder-burning overhead tasks. The innovative design is also a godsend when nailing top plates to floor joints or when crawling under that low deck to reinforce the new hot-tub. A patented push-button, depth-of-drive control of course means there’s no adjusting compr… more >>

Rating: 4 Bostitch F33PT 33 Degree Paper Tape Framing Nailer / Metal Connector Nailer (out of 6 reviews)

>>See Bostitch F33PT 33-Degree Paper Tape Framing Nailer / Metal Connector Nailer other details


Factory-Reconditioned Bostitch U/F21PL Round Head 1-1/2-inch to 2-1/2-inch Framing Nailer includes Postiive Placement Tip

41eXk3YtnlL. SL160  Factory Reconditioned Bostitch U/F21PL Round Head 1 1/2 inch to 2 1/2 inch Framing Nailer includes Postiive Placement Tip

  • Tool converts to metal connector nailer in seconds with included tip
  • Lightweight Magnesium housing weighs just 8.1 lbs
  • More power: 1050 inch lbs for engineered lumber
  • Tool free adjustable exhaust
  • Patented push-button depth of drive

The Bostitch F21PL Factory Reconditioned 2Inch – 3-1/2Inch Industrial Stick Framing Nailer, 80 – 120 PSI, 21° is made of magnesium alloy that makes the tool durable. This factory reconditioned framing nailer comes with two nosepieces that let you to easily change the tool from framing connector to metal connector application. Besides, this bostitch framing nailer has a push button that lets you adjust the depth to which the nails need to be set. The smart trigger of the nail framing gun lets you choose the firing mode. The adjustable belt hook allows this bostitch framing nailer to be hung from the roof and thus adds to the convenience. The F21PL can also drive the plastic collated 1-1/2″ and 2-1/2″ metal connector nails. Moreover, the hardened steel wear guards and the skid resistant rubber pads make this tool user friendly.   Features: Aggressive teeth for toe nailing Steel guards with anti-skid rubber inserts More power for engineered lumber New Smart Trigger … more >>

Rating: 4 5 Factory Reconditioned Bostitch U/F21PL Round Head 1 1/2 inch to 2 1/2 inch Framing Nailer includes Postiive Placement Tip (out of 3 reviews)

>>Find more about Factory-Reconditioned Bostitch U/F21PL Round Head 1-1/2-inch to 2-1/2-inch Framing Nailer includes Postiive Placement Tip


Porter-Cable PTD501 1/2-Inch Pnuematic Drill

51JwiRjUn9L. SL160  Porter Cable PTD501 1/2 Inch Pnuematic Drill

  • 1/2 inch reversible pneumatic drill with adjustable side handle
  • One-touch forward/reverse control
  • 500 RPM speed; 6 SCFM at 90 PSI
  • Weighs just 4.63 pounds
  • Includes drill and side handle

The Porter-Cable PTD501 1/2-Inch Pneumatic Drill offers a convenient one-touch forward/reverse switch for easy operation. This 6 SCFM at 90 PSI drill features 500 RPM speed with variable speed trigger for complete control. The side handle is adjustable for your comfort, and the handle features a useful exhaust feature which minimizes noise during use. The powerful PTD501 is extremely easy to handle–it weighs less than 5 pounds…. more >>

>>See Porter-Cable PTD501 1/2-Inch Pnuematic Drill other details


Fuji Industrial Spray Equipment 9080 Mini-Cup Set, 3-Piece

41JGglFv9EL. SL160  Fuji Industrial Spray Equipment 9080 Mini Cup Set, 3 Piece

  • Industrial spray mini-cup set for spray gun use or paint storage
  • Perfect size for touch-up jobs and smaller projects; easier spray gun access to confined areas
  • Pressurized design for consistent spray pattern
  • Each cup comes with heavy-duty lid and gasket
  • 3-piece set of 8-ounce mini-cups; cups fit any Fuji spray gun

The Fuji industrial spray equipment mini-cup set provides you with a 3-piece set of 8-ounce (1/2 pint) cups for use with your spray gun. These small cups make it easier for you and your spray gun to access confined areas such as cabinets and bookshelves; they are the perfect size for holding the paint needed for touch-up jobs, smaller projects, or when you want to quickly change between colors. Their lightweight design takes weight off your wrist and lessens fatigue. Each of the 3 cups comes with a heavy-duty lid and gasket for secure paint or stain storage. These mini-cups are pressurized to provide a consistent spray pattern and can be used with any Fuji spray gun…. more >>

Rating: 4 Fuji Industrial Spray Equipment 9080 Mini Cup Set, 3 Piece (out of 4 reviews)

>>Read more about Fuji Industrial Spray Equipment 9080 Mini-Cup Set, 3-Piece


Arrow Fastener 508 1/2-Inch T50 Staples (1,250-Pack)

411K34ZGDTL. SL160  Arrow Fastener 508 1/2 Inch T50 Staples (1,250 Pack)

  • 1,250 staples
  • .050 wire
  • 3/8″ crown width
  • 1/2″ leg length
  • Fit the following Arrow staple and/or nail guns: T50, T50PBN, T55, ET50, ET50BN and ET50PBN

For Use In: – Arrow – PowerShot – Craftsman – Black and Decker – Stanley – Ace – And Other Narrow Crown Heavy-Duty Staple Guns – 1,250 Staples – Made in USA… more >>

Rating: 5 Arrow Fastener 508 1/2 Inch T50 Staples (1,250 Pack) (out of 1 reviews)

>>More about Arrow Fastener 508 1/2-Inch T50 Staples (1,250-Pack)


Bostitch PT-2319-3M 3/4-Inch 23 Gauge Pin (3000 per Box)

51XSBF5ERSL. SL160  Bostitch PT 2319 3M 3/4 Inch 23 Gauge Pin (3000 per Box)

  • Pack of 3/4-inch 23 gauge pins
  • Coated finish protects against damage
  • For use with the Bostitch HP118K and TU-216-2330 Headless Pinners
  • Packaged in box of 3000
  • For Use in the Bostitch HP118K and TU-216-2330 Headless Pinners

23 gauge headless micro pins fit all 23 gauge pin nailers. Nails leave no visable mark in the workpiece. 3000 nails. For use in the Bostitch model No. HP118K and other pin nailers. No. PT 2312 3M: 1 2″ No. PT 2319 3M: 3 4″ No. PT 2325 3M: 1″ No. PT 2330 3… more >>

Rating: 5 Bostitch PT 2319 3M 3/4 Inch 23 Gauge Pin (3000 per Box) (out of 2 reviews)

>>Find more about Bostitch PT-2319-3M 3/4-Inch 23 Gauge Pin (3000 per Box)


Arrow Fastener 505 5/16-Inch T50 Staples (1,250-Pack)

1124DH9F1ZL. SL160  Arrow Fastener 505 5/16 Inch T50 Staples (1,250 Pack)

  • 1,250 staples
  • .050 wire
  • 3/8″crown width
  • 5/16″ leg length
  • Fit the following Arrow staple and/or nail guns: T50, T50PBN, T55, ET50, ET50BN and ET50PBN

Arrow’s T50 5/16-inch staples are made of .050 wire with a 3/8-inch crown and 5/16-inch leg length. They come 1,250 to a pack…. more >>

>>Read more about Arrow Fastener 505 5/16-Inch T50 Staples (1,250-Pack)


B & C Eagle A3X120HDR/22 Full Head 3-Inch by .120-Inch 20 to 22 Degree Plastic Collated Hot Dipped Galvanized Ring Shank Framing Nail (500 per Box)

51CMBRGFFTL. SL160  B & C Eagle A3X120HDR/22 Full Head 3 Inch by .120 Inch 20 to 22 Degree Plastic Collated Hot Dipped Galvanized Ring Shank Framing Nail (500 per Box)

  • Pack of 3-inch 20 to 22 degree framing nails
  • Hot-dipped galvanized for durability
  • For use with select Hitachi, Duo-Fast, Senco, Makita, Porter-Cable, DeWalt, and Max nailers
  • Conveniently packaged in box of 500
  • Porter-Cable FR350, FR350MAG, and SN890RH

B & C Eagle, 500 Count, 3″ x .120, Ring Shank, Hot Dipped Galvanized, Plastic Collated, Framing Nails, With Full Round Head, Fits The Following Nail Guns: Hitachi Nr83a, Nr83a2, Nr83a2s, Nr90ac, Duo-Fast Cn350, Senco Sn60, Sn65, Makita An8300, An922, Porter Cable Fr350, Fr350a, Fr350mag, Max Sn890rh, Bostitch N88rh, N95rhn, F21pl, Bosch Sn350-20F, B&C Eagle Sn2290, Dewalt D51844, D51850, Rigid R350rha, Milwaukee 7100-20 & Most Other 20 To 22 Degree Full Round Head Framing Nailers…. more >>

Rating: 3 5 B & C Eagle A3X120HDR/22 Full Head 3 Inch by .120 Inch 20 to 22 Degree Plastic Collated Hot Dipped Galvanized Ring Shank Framing Nail (500 per Box) (out of 2 reviews)

>>More about B & C Eagle A3X120HDR/22 Full Head 3-Inch by .120-Inch 20 to 22 Degree Plastic Collated Hot Dipped Galvanized Ring Shank Framing Nail (500 per Box)