Air Hand Tools

MV2HH This is a two-in-one piece of equipment that can be used for vibrating walls, then adapted to screeding concrete in seconds with no tools. The high-profile screed bars go up to 20 feet long and require only one power unit. The Honda engine is elevated off of the screed bar for longer engine life, allowing the use of more forceful vibrators. Features: -A Hummer Screed gives the contractor two very useful pieces of equipment for the price of one -Moving the engine weight to the handle adds more vibration to the screed blade -Longer engine life for screeding -Better balance for easier lifting -No tools required to -Attach the HUMMER vibrator to the screed frame -Adjust the elevation of the control handles for operator comfort -Connect or disconnect the screed blade -TWO MACHINES IN ONE! Specifications: -Included Flexible Shaft: 3.5′ -Included Vibrator Head: 2” x 4” -Engine Type: Honda 4-Stroke -Horsepower: 1.6 Hp -Max Screed Bar Length: 20′ -Weight: 42 lbs Lift Handles for Screed… more >>

>>Other details about Hummer Concrete Vibrator and Concrete Screed 2 Combo with 3.5′ Shaft and 2″ x 4″ Head with Screed Choices

• Industrial-duty US-made Baldor motor
• Industrial-duty general-purpose mounted and wired magnetic starter
• Less than 5 PPM oil carry-over (blow-by) rating
• 145-175 working PSI
• Pump RPM: 968

Quincy reciprocating air compressors are designed to be a compressor for life. They are built for efficiency and lower operating costs, producing more compressed air at a lower horsepower. They run at a slower RPM, run cooler and cost less to operate. Heavy-duty compressors are engineered for industrial applications and boast a best-in-the-industry 50,000-hour pump life rating. Quincy delivers performance you demand and reliability you trust. 2-year limited warranty (5-year limited warranty on pump if customer purchases and uses maintenance kit.) Call a sales representative to order maintenance kit. U.S.A. Package Type: Standard, Volts: 460, Motor Phase(s): 3, HP: 10, Amps: 14, Max. PSI: 175, CFM at 175 PSI: 35, CFM at 100 PSI: 35.9, Tank Type: Vertical, Working Pressure (PSI): 145 – 175, Stage: Two, Drive: Belt, Air Outlet Size (in.): 1, Air Tank Size (gal.): 120, After-Cooler Included: No, Drain System: Manual ball valve, Portable or Stationary: Stationary, Pump: Cast iron, Duty Cycl… more >>

>>Other details about - Quincy Reciprocating Air Compressor – 10 HP, 460 Volt 3 Phase, Model# P2103DS12VCB46

PRO3218 -Beam requires 2 PRO3200 power units -18′ Beam -Patented magnesium blade -Max Bar Length per Power Unit: 12 ft -Blades 14′-22′ for 2 person operation… more >>

>>Read more about 18′ Beam for Power Screed (Requires 2 Power Units)

• Bolt Capacity: 5/8″. Square Drive: 1/2″. RPM: 7,000. Blows per minute: 1200. Max.
• Torque: 425 ft. lb. Length: 6-3/4″. Weight: 5-5/8 lbs. Air Pressure: 90 PSI.
• Air Inlet: 1/4″ NPT. 2″ extended anvil. Build in regulator. 425 ft. lbs. torque.
• Long life twin hammer clutch. Ring type socket retainer. High performance motor.
• Our best 1/2″ impact. Plenty of power for the toughest jobs.

Bolt Capacity: 5/8″. Square Drive: 1/2″. RPM: 7,000. Blows per minute: 1200. Max. Torque: 425 ft. lb. Length: 6-3/4″. Weight: 5-5/8 lbs. Air Pressure: 90 PSI. Air Inlet: 1/4″ NPT. 2″ extended anvil. Build in regulator. 425 ft. lbs. torque. Long life twin hammer clutch. Ring type socket retainer. High performance motor. Our best 1/2″ impact. Plenty of power for the toughest jobs…. more >>

>>Find more about Taylor Pneumatic: Heavy Duty 1/2″ Impact 2″ Exta: RPM:7000. Blows:1200. 90PSI. Torque: 425 ft lb..

• 2-3/8″ x .113″
• Ring shank
• Box of 2500 nails
• Galvanized
• Paper tape

“SENCO” FRAMING NAILS

2-3/8″ x .113″
Ring shank
Galvanized
Box of 2500 nails
34 degree clipped head
Paper tape
Fits Senco, Paslode, Hitachi,Porter Cable and others
Fits “FramePro” 600 (Ace No. 2103547)
Boxed… more >>

>>More about Senco Fastening Systems GE24AABKN Framing Nails with Galvanized Ring 2-3/8″

Senco 3/16 X 5/8 22Ga Brown Painted Staple… more >>

>>Other details about Senco D10BADN592 3/16 X 5/8 22Ga Brown Painted Staple 20,000 Per Box

• nail roofing galvanized

Large flat head. Diamond point. 11-gauge. No. 34HGRFG: 3/4″ No. 78RGRFG: 7/8″ No. 1HGRFG: 1″ No. 114HGRFG: 1-1/4″ No. 112HGRFG: 1-1/2″ No. 134HGRFG: 1-3/4″ No. 2HGRFG: 2″ No. 212HGRFG: 2-1/2… more >>

>>Find more about 50 lb. Hot-Dipped Galvanized Roofing Nail

• 3/8″ narrow crown
• For weather stripping,insulation, upholstery and carpet pads
• For Use In (Ace No. 2034775, 2014413) Arrow #T50, #HT50A, #T55, #ET50,
• Black & Decker #2000, #3000, #4000, #5700, Master Mechanic #M5000, #M5100, #M5500
• Stanley Parker #PHT150, #69-500, #TR60, #69- 550 and Swingline #10401 Staple Guns

Ace Heavy Duty Staple 3/8 Narrow Crown For Weather Stripping, Insulation, Upholstery And Carpet Pads Fits Ace Nos. 2111771, 2064673, 2034775 And 2014413, Arrow Et-50, Etn-50, T-50pbn, T-50, T55, And Etf50pbn, B&d 5700, 4000e, 2000e, 3000e And 6000e, Master Mechanic M5500, M5000, M5100, Powershot 9100, 5700 And 8000, Stanley Tr60, Tr85, Tr150, Tr250 And Tre550, Swingline 10401 Box Of 1,000 Discovery Con, Nbr, Sup, Hwu Price is indicated for bulk discounted quantity of 5 unit(s) per case…. more >>

>>See Ace Heavy Duty Staple 3/8 Narrow Crown other details

• 1 Box

Item #: 688-FN1532. Adhesive collated Applications = FinishingCross Section Shape = RoundMaterial = SteelNail Length = 2 inPoint Shape = ChiselQuantity = 3655 per packShank Type = SmoothType = Finish NailWire Size = 0.0720 in, 15 gauge
Customers also search for: Tools and Storage\Pneumatics\Pneumatic Drilling and Fastening Tools\Pneumatic Nailer Parts and Accessories Discount Nail Finish 072 2″ Gal.3655 Per Box, Buy Nail Finish 072 2″ Gal.3655 Per Box, Wholesale Nail Finish 072 2″ Gal.3655 Per Box, 791400050180, FN1532, Pneumatic Nailer Parts and Accessories… more >>

>>See Nail Finish 072 2″ Gal.3655 Per Box (688-FN1532) Category: Pneumatic Nailer Parts and Accessories other details

• for auto tires, bikes, RV’s & trailers, rubber rafts & balls
• 2 nozzle adapters and sport needle
• 250psi and only 6X6X4 inches
• 30 pressure hose with lock-on
• adapter cord is 10 ft. long

250 PSI Mini Air Compressor is great for roadside emergencies!… more >>

>>Read more about Mini Air Compressor