Hitachi NT65M2 16 Gauge 1-Inch to 2-1/2-Inch Finish Nailer
- 16-gauge finish nailer with selective actuation for sequential or bump firing
- 360 degree adjustable exhaust directs air away from the user
- Tool free depth of drive; easy clear nose; elastomer grip
- Includes tool fitting, safety glasses, no-mar tip, hex bar wrench, and case
- Weighs 3.7 pounds; 5-year manufacturer’s warranty
Product Description
Includes: Safety Glasses, Tool Fitting, No Mar Tip, Hex Bar Wrench, Case.
3.7 lbs, lightweight and well-balanced for minimal fatigue and increased maneuverability. No-mar tip protects the work surface from damage. Elastomer grip adds comfort and a secure hold. Accepts 1″ to 2-1/2″, 16-gauge fasteners. Fastener Type: 16 gauge finish. Magazine Angle: Straight. Fastener Length Capacity: 1″ – 2-1/2″. Fastener Diameter Range: 16 gauge. Magazine Capacity: 100. Magazine Loading: Top. Operating Pressure: 70 – 120 PSI. Jam Clearing: Tool-less. Actuation: Selective (sequential / bump). Grip: Rubber. Tool Dimensions: 11-5/8″ L x 2-27/32″ W x 10-7/8″ H. Tool Weight: 3.7 lbs.Amazon.com Review
The Hitachi 16-gauge finish nailer is designed to meet the needs of the advanced do-it-yourselfer or the professional trim carpenter. This model’s built-in air duster button permits air from the compressor to bypass the nailing function, so you can clear away dust from… More >>
Hitachi NT65M2 16 Gauge 1-Inch to 2-1/2-Inch Finish Nailer
I have used this gun now to do quite a bit of siding, using wood siding and fiber cement trim. I have fired short finish nails and longer 2 1/2 inch nails (capacity). It has never, never jammed and never failed to fire if I remembered to turn on the compressor and to load in nails! There have been times that I drove a longer nail from one corner trim piece of fiber cement 1 X 6 into another and it didn’t sink all the way, but it was silly of me not to change to shorter nails, so I don’t blame the poor gun!
It’s pretty, so you’ll be tempted to treat it gently, but that isn’t needed… it’s a toughy!
This gun works well as a replacement for my old 16 gauge Hitachi gun, which is 10 years old and still works but jams too often .This version has a quick release so jams are easier to clear now hope it lasts as long.
Pros:
-exhaust can be rotated (air in the face is annoying and dangerous)
-button to spray air (very handy for bleeding compressors at the end of the day)
-great weight and balance, extremely comfortable
-jam clearing mechanism is super easy to use (haven’t had a jam yet though)
-very consistent depth of drive
-comes with air fitting pre-installed (no need to buy)
Cons:
-don’t like the tip style as much as my other nailers
-no lockout mechanism to prevent dry fire
It’s worked well for me on furniture projects, and I don’t have any major complaints. It’s a great nailer (maybe even the cadillac), but I probably wouldn’t recommend it to any of my amateur woodworker friends, because they can get something else to do the job at a fraction of the cost (lots of good nailers on the market right now).
Five stars for quality and design, but only three stars for value. In the end, it’s still a five star tool.
Lightweight and I haven’t had a jam in over 3 cases of nails hanging beaded pine ceiling. I read a review when I purchased the gun that said “The gun feels like an extension of your hand.” They were right.The air blowing feature seems a bit pointless, but it doesn’t affect anything.
The spray button is a nice touch. A solid gun, although hideous, and the grip and trigger are nice. No jambs to report. I actually shot 18ga nails in a pinch out of this gun (not recommended!) but it shot them two at a time for a while and still didn’t jamb! Why they made it look like an alien respiratory system, I don’t know, but form over function here, it’s really not a beauty contest. The only (minor) complaint I have is that the large round head/tip is not perfectly tailored to small 2 5/8 crown moulding. It is still possible to get it where you want it to sink the nail well, but if you don’t use the tip right you may have to set 1 out of 20 with a nailset which is fine if you keep it in your belt. I do think the tip is fantastic and sturdy in all other situations. Maybe I should just use 2″ brads for that mould.