Campbell Hausfeld TL110300AV 1 5/8-Inch Stoke Hammer
- Great for Do-It-Yourself projects.
- Produces 5,000 blows per minute.
- Cuts rusty bolts and metal panels easily.
TL1103 Campbell Hausfeld is a leader in air tools, accessories and replacement parts you can depend on. This air powered chisel is great for do-it-yourself projects as well as professionals. It produces 5,000 blows per minute that can cut rusty bolts an metal panels easily. Designed with a hardened steel chisel retainer, your chisel bit will always be held in place safely. The air chisel is designed lightweight and ergonomic for comfort with long use. Get the job done right by trusting Campbell Hausfeld for all your air tool needs. Features: -1-5/8” stroke length (steel barrel) designed for power and long life -2 finger trigger for ease of operation and comfort -Set of 2 chisel bits included -1/4” NPT screened air inlet keeps dirt and debris from damaging air tool Specifications: -Blows per Minute: 5,000 -SCFM: 6.0 -Air Pressure: 90 PSI -Air Inlet: 1/4” NPT -Weight: 3.01 lbs -Dimensions: 2.3” H x 8.5” W x 8.8” L Specification Sheets: TL1103… more >>
Rating: 
(out of 3 reviews)
>>More about Campbell Hausfeld TL110300AV 1 5/8-Inch Stoke Hammer
Review by Michael Pietrzak for Campbell Hausfeld TL110300AV 1 5/8-Inch Stoke Hammer
Rating:
I used this to break up concrete in my basement. I had doubts if it would even do it, but took a chance anyhow. Well, after about 2 hours use, it was still working & really did a good job of breaking through 3″ of concrete. I made a 6 foot long trench with it. It is made of some sort of plastic, but I much prefer that to the extra weight of my other all aluminum hammer.
Review by JLDET5 for Campbell Hausfeld TL110300AV 1 5/8-Inch Stoke Hammer
Rating:
I used this to lift old tile off a bathroom floor with the wide chisel also sold on Amazon. Dusty work but got the job done.
The chisel is listed as Wide Blade Scraper (OLD1970) Category: Air Hammer Chisels
Review by Donald W. Monroe for Campbell Hausfeld TL110300AV 1 5/8-Inch Stoke Hammer
Rating:
The only down side to this hammer is that the chisels are too soft for working on automobile exhaust bolts. I was trying to cut the bolts but the chisel rounded over in less than 5 minutes. I sharpened it twice but to no avail. I ended up using a sawsall to cut off 90% of the nut/bolt and then the hammer to finish the job. I haved looked on the web for a harder chisel set but cannot find one.