Air Hand Tools

• Industrial-duty US-made Baldor motor
• Industrial-duty general-purpose mounted and wired magnetic starter
• Less than 5 PPM oil carry-over (blow-by) rating
• Pump RPM: 923
• 4-cylinder pump design

Quincy Air Master reciprocating air compressors are designed to be a compressor for life. They are built for efficiency and lower operating costs, producing more compressed air at a lower horsepower. They run at a slower RPM, run cooler and cost less to operate. Heavy-duty compressors are engineered for industrial applications and boast a best-in-the-industry 50,000-hour pump life rating. 2-year limited warranty (5-year limited warranty on pump if customer purchases and uses maintenance kit.) Call a sales representative to order maintenance kit. U.S.A. Package Type: Standard, Volts: 230, Motor Phase(s): 3, HP: 15, Amps: 42, Max. PSI: 175, Working Pressure (PSI): 145 – 175, CFM at 175 PSI: 51, CFM at 100 PSI: 54.4, Tank Type: Horizontal, Air Tank Size (gal.): 120, Stage: Two, Drive: Belt, Air Outlet Size (in.): 1, After-Cooler Included: No, Drain System: Manual ball valve, Portable or Stationary: Stationary, Pump: Cast iron, 4 cylinder, Duty Cycle: 100%, Pump Life (hrs.): 50,000+, Dimen… more >>

>>More about - Quincy Air Master Reciprocating Air Compressor – 15 HP, 230 Volt 3 Phase, Model# 2153DS12HCA23

• “PASLODE” ANGLE FINISH NAIL
• 2-1/2″
• 2,000 Count
• 20°ree. Angle
• Galvanized Finish Nail

2,000 Count, 2-1/2″, 16 Gauge, 20°ree. Angle, Galvanized Finish Nail…. more >>

>>Find more about Paslode 650232 Angle Finish Nail 2-1/2″

2475F13GH Ingersoll-Rand Type-30 F-Series Two-Stage compressors meet the needs of fleet or field service applications. Featuring truck-bed mounting, the F-Series includes electronic ignition, idle engine control, a 30-gallon ASME receiver, an OSHA approved, fully enclosed belt guard and a weather-resistant powder-coat paint finish. Features: -Premium Honda Engine -Durable cast-iron construction -Extended pump life Specifications: -2 Stage -Tank: 30 Gal -Max PSI: 175 -NPT Outlet: 3/4 inch -ACFM @ 175 PSI: 25 -Running HP: 13 Start Up Kit: Use of the All-Season Select lubricant from commission of the compressor extends the usual 1 year warranty on the pump itself to 2 years. Designed for 2,000 hours or approximately 1 year of operation. Start Up Kit Features: -(4) Quarts All-Season Select lubricant -MSDS sheet and decal -(2) Air filter element replacements, and 4-cycle engine oil -Start Up Kit #: 32312936 -It is required for warranty purposes to top off oil and change the oil filter afte… more >>

>>Find more about 30 Gallon Gas Powered Air Compressor w/ Honda Engine (13 HP)

Senco 7/16″ X 3/8″ 20Ga Galvanized Staple H06BAAN… more >>

>>More about Senco H06BAAN 7/16″ X 3/8″ 20Ga Galvanized Staple

• Galvanized for rust prevention
• Significantly more holding power than straight pins, but a fraction the size of an 18 gauge head
• Well made product from Cadex, manufactuer of high grade finish nailers

Cadex 21 gauge brads are considered the highest quality available, developed by the same company that markets the highly rated Cadex and Nikle 21 gauge tools. The slightly rounded edges result in less brad deflection in the wood than the cheaper brad brads. If you are using 21 gauge in the first place, you are likely working on fine finishing or furniture. Yes, you can buy cheaper brads, but at a fraction of a penny a brad, why compromise on your project?… more >>

>>Find more about Cadex M-30-10M Brad Nail 21 Gauge 30MM Galvanized 10,000 Count

• Porter-Cable
• PFN16200
• Nails

Porter-Cable PFN16200 2,500 Count 2″ Standard Finish NailsManufacturing a full line of power tools, equipment and accessories, Porter-Cable provides a product for every situation. From new home construction to building maintenance. From farms to upscale woodworking. Everyone from seasoned professionals to casual weekenders are putting Porter Cable tools to work whenever they want the job done right.Porter-Cable PFN16200 2,500 Count 2″ Standard Finish Nails Features:; Finish nails; Use with the 3/4″ to 2-1/2″ finish nailer kit FN1250 ; 16 gauge; 2″; 2,500 per box… more >>

>>More about Porter-Cable PFN16200 2,500 Count 2″ Standard Finish Nails

• Galvanized Straight Finish nail for applications: trim and molding fits.
• Fits The Following Units: Paslode 902000 and 501679
• Made in the USA.

4000ct Contractor PackGalvanized Straight Finish nail for applications: trim and molding fits.Fits The Following Units: Paslode 902000 and 501679Made in the USA…. more >>

>>Read more about Paslode 650536 2-Inch F16 Contractor Pack

Senco 1-3/4″ X 18Ga Galvanized Brad Nail… more >>

>>Find more about Senco A201759 1-3/4″ X 18Ga Galvanized Brad Nail

• 1″ Length; 2,500 Count/Pkg

Compatible with Fasco® FN, Bea® SK400, ASTRO® TIP, Omer® Group14, Hitachi® NT65A, Paslode® F-16 brad nails…. more >>

>>Read more about Magnate T25 16 Gauge Brad Nail – 1″ Length; 2,500 Count/Pkg

• Electro-Galvanized Wire Collated; 7/8″ Length; 15° Angle; 7,200 Count/Pkg

Compatible with Senco®, Bostitch®, Hitatch®, Atro®, Max®, Fasco®, Stan-Tech®, Porter Cable® and newer Paslode® models…. more >>

>>Find more about Magnate RN22 15° Coil Roofing Nails – 7/8″ Length; 15° Angle; 7,200 Count/Pkg