Air Hand Tools

• 3-1/4″ FRAMING NAIL
• framing nail full round head pneumatic stick

Fits: Senco: Frame Pro 700XL, Frame Pro 702/752XP, Frame Pro 602/652, SN60/65; DeWalt: D51845; Duofast: Main Frame NSP-350F1, CN350,CN350B, NSP83; Bostitch: N88RH-1, RN90, N95RHN; Hitachi: NR83A, NR83A2,NR90AC, NR90AC2; Porter Cable: FR350MAG, FR350A; Others: Airy: ABL-8290, Atro: RHS-900/921, Campbell Hausfeld: NS2090, Fasco: F5C-RHN20-90, Hilti: RHN9020, Makita: AN922, AN8300, Max: SN890RH, SN80, SN90, SN90A, Spotnails: XPR90, Stantech: SDN11, Supco: SFN11…. more >>

>>More about Framing Nails, 3 1/4″

• 2 3/8″ x .113 SM
• Wire Coil
• 5m count
• Brite
• Fits NV83A2

Hitachi 12221 2-3/8″ x 0.113″ Full Round Head Brite Smooth Shank Basic Wire Coil Framing Nails 5000 Count… more >>

>>More about Hitachi 12221 2-3/8-Inch x .113 Smooth Framing Nail

• 2000 Count
• 2-3/8″ x .113
• Rink Shank
• Galvanized, 28 Degree
• Wire Weld, Full Head Stick Nail

“STANLEY” GALVANIZED RINK SHANK NAIL

2,000 Count
2-3/8″ x .113
Rink Shank
Galvanized, 28 Degree
Wire Weld, Full Head Stick Nail
Thickcoat Galvanization Provides Consistent
High Performance Corrosion Resistant Coating Designed To Meet Or Exceed The Performance Of ASTM A153 Hot Dipped Galvanized
Specifically Designed For Use In All Pressure Treated Lumber & Exterior Applications
Fits Bostitch Model #F28WW
True Value #632556 & Other Bostitch Models N80SB & N88WW…. more >>

>>See STANLEY BOSTITCH S8DRGAL-FH GALVANIZED RINK SHANK NAIL 2000 COUNT other details

Do it™ Electro Galvanized Roof Nail7/16″ flat head. 11-gauge diamond point. Wide head aids holding and reduces pull through. For asphalt shingles, roofing felt, or insulating board. 5 lb. box.No. 708327: 7/8″No. 708399: 1″No. 708522: 1-1/4″No. 708674: 1-1/2″No. 708782: 1-3/4″No. 709093: 2″No. 709328: 2-1/2″No. 732168: 3″… more >>

>>See 5lb 7/8″ Eg Roof Nail other details

• Variable speed trigger. Strong steel tube cover. Lightweight die cast handle.
• Can be used with all types of caulking material

Variable speed trigger. Strong steel tube cover. Lightweight die cast handle. Can be used with all types of caulking material… more >>

>>Read more about Taylor Pneumatic: Air Caulking Gun.

• Fox #FJ14VC 50LB1.5″HG Fence Staple
• FOX VALLEY STEEL AND WIRE

50 LB, 1 1/2′ Hot Galvanized Fence Staple…. more >>

>>More about Fox #FJ14VC 50LB1.5″HG Fence Staple [Misc.]

The DeWalt D55273 is a Factory Reconditioned Heavy-Duty 10.5 Gallon Gas Wheeled Portable Compressor. The DeWalt Compressor has an all new, long life cast iron oil lube pump that produces 10.3 SCFM at 100 PSI and a large 10.5 gallon tank with 150 Max PSI tank pressure, increasing surge air supply. The high air delivery and increased surge supply provides users with the ability to add two additional framing nailers or one additional roofing nailer allowing contractors to operate a total of seven framing nailers or three roofing nailers from a single compressor at the same time. The pump of the DeWalt D55273R is also designed with patent pending low oil shut-off to prevent the pump from continuing to operate without a sufficient amount of oil. The DeWalt Air Compressor  is equipped with a one-hand push/pull handle and two 12 inch non-flat, semi pneumatic tires giving the user an enhanced 3.6 inch ground clearance and the ability to easily navigate any rugged jobsite terrain.   Featu… more >>

>>Other details about DeWalt D55273R Factory Reconditioned 10.5-Gallon Gas Wheeled Portable

• Plain shank framing nails, clipped head
• Hot dipped galvanized
• 2,000 per box

B & C Eagle, 2,000 Count, 3-1/2″ x .131, Smooth Shank, Hot Dipped Galvanized, Framing Nails, Notched Head Fits The Following Bostitch Nailers: F28WW, N80S, N80SB, N86S, N88WW, N100S…. more >>

>>More about B & C Eagle 312X131HD/28 Clipped Head 3-1/2-Inch by .131-Inch 28 Degree Wire Collated Hot Dipped Galvanized Smooth Shank Framing Nail (2,000 per Box)

• Heavy duty construction for long life under heavy use
• Adjustable guard/guide allows operator to set depth of cut
• Ergonomic rubber grip that provides operator comfort
• Lock off throttle to prevent accidental start ups
• Ideal for cutting aluminum, plastics, fiberglass and sheet metal up to 16 gauge

Strokes per minutes: 9500; air inlet thread: 1/4-inch NPTF; minimum hose size: 3/8-inch; sound dBA: 98; length: 8.63; weight: 1.63 lbs… more >>

>>Other details about Chicago Pneumatic CP881 Heavy Duty Air Reciprocating Saw

• 1-3/4″ Length
• Fits many standard 18 gauge brad nailers
• 18 gauge for fine finish work
• 5000 per Box

Porter Cable PBN18175 1-3/4″ 18 Gauge Brad Nails 5000 per Box… more >>

>>Find more about Porter Cable PBN18175 1-3/4″ 18 Gauge Brad Nails 5000 per Box