Air Hand Tools

Senco 1-1/2″ 15Ga Stainless Finish Nail 4000 per box… more >>

>>Other details about Senco 1-1/2″ 15Ga Stainless Steel Finish Nail 4000 per box

• Compact for tight applications
• High Torque

This product is Brand New. SPECIFICATIONS: 4 CFM Air Consumption…. 50 Ft/Lbs Maximum Torque… 150 RPM Free Speed… 90 PSI Operating Air Pressure. 1/2″ Square Drive… 3/8″” Air Inlet… 10″ Overall Length… This 1/2″ Air Impact Wrench delivers 50 ft./lbs. maximum torque with a free speed of 150 to make easy work of general service applications. Compact, well-balanced, and lightweight, this tool is a great value…. more >>

>>Find more about 1/2″ Compact Air Ratchet Wrench

• 5/8″ Length; 10,000 Count/Pkg

Compatible with Fasco® S3G, Bea® 71. Omer® 3G, Atro® 72, Senco® C, Bostitch® 7, Porter Cable® Us58…. more >>

>>See Magnate CS16 22 Gauge Stainless Steel 3/8″ Crown Staple – 5/8″ Length; 10,000 Count/Pkg other details

• 1″ x 3/16″ Crown Staple, 20/21 Gauge, like Bostitch SB97
• Box of 5000 will do approx. 500′ on most hardwood floors
• For use in Bynford AFS Flooring Stapler, Also fits Bostitch LHF97125-2 stapler
• Similar to Bostitch SB97-1GLS staples
• EACH BOX INDIVIDUALLY PADDED, WRAPPED, AND TAPED

These staples are commonly used for 5/16″ – 1/2″ hardwood flooring (ideally suited for 5/16″ – 3/8″). The are 20/21 gauge, 3/16″ crown, and 1″ in length. It is recommended to check with your flooring supplier for suitability for specific projects. Box of 5000 staples wil be enough for approx. 500 sq. ft. of 3″ to 3-1/4″ wide flooring…. more >>

Rating: (out of 1 reviews)

>>Read more about Hardwood Flooring Staple 1″ x 3/16″ (SB97 Type) Box 5000

• Oil free
• Lightweight magnesium housing
• Ultra quiet rear exhaust
• Adjustable depth control
• No mar tip

1/2″ – 1-1/2″ Narrow Crown Stapler Kit, Consists Of: Stapler, 1/4″ Fitting, 1000 1″ Staples & Carrying Case, Tool Uses Bostitch SX5035 Series Staples, Magnesium Housing For Durability, 2.5 LB Ultra Light, Rear Exhaust, Adjustable Depth Control, Oilless Operation, Made In The USA…. more >>

Rating: (out of 19 reviews)

>>More about Bostitch SX150K-1 18 Gauge 1/2-Inch to 1-1/2-Inch Narrow Crown Stapler

• 2.5 -12 Ft Lbs Max Torque
• Reversible
• Built In Power Regulator
• Quick Torque Adjustment

1/4 In. Pneumatic Screwdrivers Type: Impact Screwdriver Drive Size: 1/4 RPM: 10000 Type of Power: Pneumatic Clutch Type: Rocking Dog… more >>

>>Find more about Chicago Pneumatic CP2036 Low Torque Straight Impact Screwdriver with Quick Change Chuck

Senco 1/2″ X3/8″ 22Ga Galvanized. Staple C08BAAP… more >>

>>See Senco 1/2″ X3/8″ 22Ga Galvanized. Staple 35,000 Per Box other details

• Tank compressor with a rugged cast-iron pump provides up to 3,000 hours of extended life
• Oil-lubricated pump has a traditional design that is quieter and longer lasting
• High 5 hp peak motor meets tough end-user demands while operating on standard 120/240 volt service
• Durable and safe 20-gallon ASME code tank for abundant air storage
• 35.1 by 19.5 by 30.5-Inch; 148.8 pound

Includes 20 Gallon Single Stage Oil-Lubricated Air Compressor – VS5006The VS5006 from Campbell Hausfeld is a 20 gallon oil-lubricated air compressor that has a rugged cast-iron pump that provides up to 3,000 hours of extended life. The design is traditional, but quieter and longer lasting. Its high 5-horsepower (peak) motor meets tough end-user demands, but operates on standard 120/240-volt service. The tank is durable and safe, with a 20-gallon capacity for abundant air storage…. more >>

Rating: (out of 3 reviews)

>>Read more about Campbell Hausfeld VS5006 15 Amp 2 Horsepower 20 Gallon Oiled Wheeled Single Tank Compressor

• AISI 304 Grade Stainless Steel

Steelhead Stainless Steel 16 Gauge Straight Brads 1-1/4″ Leg… more >>

>>Read more about Steelhead Stainless Steel Nail Brad 16ga 1-1/4″ 2500 ct

• AISI 304 Grade Stainless Steel

Steelhead Stainless Steel 16 Gauge Straight Brads 1-1/2″ Leg… more >>

>>Other details about Steelhead Stainless Steel Nail Brad 16ga 1-1/2″ 2500 ct