Air Hand Tools

• Designed for use with Grex 23 Model P635, P645 & P650 Pins Gauge 3/8″ Headless Pins

Grex 23 Gauge Pins 3/8″ Headless – 2.5K Box For use with Grexs industrial strength 23 gauge headless pinner. It is ideally suited for finishing work and detailed woodworking and is perfect for light wood assembly, molding and decorative trim, dowel and joint pinning, mirror and picture frame assembly. The Grex Headless Pinner utilizes an innovative and patented magazine that eliminates the need to adjust for different fastener lengths. The powerful motor will drive fasteners with ease, even into the hardest of hardwoods.The compact, lightweight, slim profile is designed for maximum maneuverability and the rear exhaust with built-in silencer makes the Grex Headless Pinner truly the Best in Class…. more >>

>>See GREX P6/10-2.5 23 Gauge 3/8-Inch Length Headless Pins (2,500 per box) other details

• 150 psi max tank pressure stores more air in the tank for longer tool runtimes
• 120 psi cut-in pressure provides 30 psi -inchBonus Air-inch before a 90 psi tool becomes inoperable
• 5.3 SCFM at 90 psi for faster tank recharge of 25 gal tank, per ISO1217
• 25 gal Vertical Tank Configuration takes less floor space
• 1.7 Running HP, 120V capacitor start induction motor for easy restarts; Oil-free pump for oil spills/contamination and maintenance-free operation

With its compact, vertical design, this oil-free compressor supports nailers and other air tools. Complete with nine wheels and a comfortable padded metal handle for easy portability, the C6110’s most helpful, time-saving feature is its ability to provide 25 gallons of air tank reserve at a 150 PSI maximum pressure. Here’s how it works: A pressure switch controller automatically starts the motor again once it hits the 120 PSI pressure point, which means the C6110 supplies 71 percent more usable air over other 125 PSI maximum air pressure models, and cuts down on wait times between re-charges. A 15 Amp circuit is the power source for the 120 volt, 1.9 running HP capacitor start induction motor, which delivers 7.7 SCFM at 40 PSI and 5.4 SCFM at 90 PSI. And because this system is oil-free, you won’t have to worry about the mess and danger of spills. Offering an ASME-approved reserve air tank, the CUL-listed C6110 comes with a high air flow regulator, high flow quick coupler, and two gages… more >>

Rating: (out of 3 reviews)

>>Read more about Porter-Cable C6110 15 Amp 2-Horsepower 25-Gallon Oil-Free Wheeled Vertical Compressor

• 120 VOLT
• PORTABLE
• 7 INFLATION ACCESSORIES
• BUILT IN ANALOG GUAGE
• CONVENIENT STORAGE COMPARTMENT

THE ULTIMATE 120 VOLT PORTABLE AIR COMPRESSOR FOR ALL HOME AND SHOP AND GARAGE AIR INFLATION NEEDS

VHEICLE TIRES, MATTRESSES, BIKES, SPORT BALLS ETC. A GREAT ITEM TO HAVE AROUND THE HOUSE… more >>

Rating: (out of 3 reviews)

>>Find more about Bonaire Portable 120 Volt Air Compressor

• 1-3/4″ Length
• 16-Gauge Finish Nails
• For FN model Stapler/Nailer
• 2500 per Box

Porter Cable PFN16175 1-3/4″ 16-Gauge Finish Nails 2500 per Box… more >>

>>Other details about Porter Cable PFN16175 1-3/4″ 16-Gauge Finish Nails 2500 per Box

• 2-3/8″ x .099 ring shank coil framing nails
• 3,000 per box
• Hitachi NV83A
• Bostitch N80C, N80CB, N86C, N100C
• Senco SCN60, SCN65

B & C Eagle, 3,000 Count, 2-3/8″ x .099, Ring Shank, Coil Framing Nails, Fit The Following Nail Guns: Hitachi NV83A, NV83A2, Bostitch N80C, N80CB, N86C, N89C, N100, Senco SCN60, SCN65, Porter Cable Coil 250, Coil 350…. more >>

Rating: (out of 3 reviews)

>>Read more about B & C Eagle 238X099RC 2-3/8-Inch by .099-Inch by 15 Degree Ring Shank Wire Collated Coil Framing Nail (3,000 per Box)

• 1450 ft lbs torque provides power to loosen rusted bolts
• High Performance Clutch means longer life and durability
• Efficient 6 Vane Motor – power with any air supply
• Three Position Regulator and Directional Control (F/R) – Lever for all controls
• Ergonomic Trigger, Bottom Exhaust – comfort, user safety

The Chicago Pneumatic 1in. Air Impact Wrench with 6in. anvil features an efficient 6-vane motor that delivers the power needed to loosen the toughest fastener…. more >>

>>More about Chicago Pneumatic CP77786 1-Inch Drive Impact Wrench with 6-Inch Anvil

• Single stage, oil lubricated, belt drive technology
• Long lasting twin cylinder pump combines cast iron cylinders with aluminum cooling fins to reduce heat, maximize CFM and extend pump life
• Heavy duty, spread voltage, induction motor allows unit to operate on 208 or 240-Volt without any wiring changes
• Large capacity, 60-Gallon ASME vertical stationary air receiver provides more air for longer run times on air tools such as ratchets, impacts, spray guns, hammers, etc
• Maximum pressure: 130 PSI; CFM at 90 PSI: 10.3; CFM at 40 PSI: 12.3; RHP: 3.1; UL and CSA certified

IL3106016 Features: -Construction material: Steel. -Single stage, oil lubricated, belt drive technology. -Long lasting twin cylinder pump combines cast iron cylinders with aluminum cooling fins to reduce heat, maximize CFM and extend pump life. -Heavy duty, spread voltage, induction motor. -ASME vertical stationary air receiver provides more air for longer run times on air tools such as ratchets, impacts, spray guns, hammers, etc. -Spread voltage motor allows unit to operate on 208 or 240 volt without any wiring changes. -Vertical stationary design optimizes storage space and secures placement. -Includes splash type lubrication, a flex leaf valve system, a tank pressure gauge and on / off switch. -UL and CSA Certified. Specifications: -Capacity: 60 Gallon. -Maximum pressure: 130 PSI. -RHP: 3.1. -CFM @ 40 PSI: 12.3. -CFM @ 90 PSI: 10.3. -Voltage: 208V or 240V. -Dimensions: 69.25” H x 27” W x 31” D…. more >>

>>See Industrial Air IL3106016 60-Gallon Belt Driven Vertical Air Compressor, Single Stage other details

• High Power to weight ratio
• 1,250 ft lbs maximum torque
• Full Power Reverse
• 360 degree swivel inlet to prevent hose knicks
• 6,000 rpm

Drive (in.): 1, Average Air Consumption (CFM): 10, CFM at Load: 46, Speed – No Load (RPM): 6,000, Blows Per Minute (BMP): 1,025, Max. Torque (ft.-lbs.): 1,250, Inlet Size (in.): 1/2, Min. Hose Size (in.): 1/2, Tool Weight (lbs.): 13… more >>

>>Find more about Ingersoll-Rand 2171XP Ultra Duty 1-Inch Pnuematic Impact Wrench

NAILS – BOX OF 5000 F25 1″. Fits Grizzly G6045, G6046, G6047, G8126, G9248, Porter Cable BN 125, Paslode F18 2138, Dewalt D51238 and Senco SLP20…. more >>

>>Read more about Grizzly G1855 18 Gauge Brad Nails – 1″, 5,000 pc.

• Compact five inch pneumatic sander with built-in speed control
• 3/32 inch random orbit eliminates swirling
• Ergonomic rubber comfort grip provides maximum comfort
• Spins at 12,000 RPM and requires 15 SCFM at 90 PSI for ideal performance
• Low-profile design weighs 2.5 pounds

Get a swirl-free finish with the lightweight Porter-Cable PTS5 5-Inch Random Orbit Pneumatic Sander. With a 3/32-inch random orbit pattern, the PTS5 eliminates annoying swirl marks while providing a smooth, even finish. The ergonomic design and low-profile design makes it easy to work for hours without any discomfort. The PTS5 spins at 12,000 RPM and requires 15 SCFM at 90 PSI for ideal performance. The built-in speed control ensures you have complete control over this sander at all times…. more >>

Rating: (out of 1 reviews)

>>See Porter-Cable PTS5 5-Inch Random Orbit Pnuematic Sander not Vacuum with 3/32-Inch Orbit other details