Air Hand Tools

• Industrial spray mini-cup set for spray gun use or paint storage
• Perfect size for touch-up jobs and smaller projects; easier spray gun access to confined areas
• Pressurized design for consistent spray pattern
• Each cup comes with heavy-duty lid and gasket
• 3-piece set of 8-ounce mini-cups; cups fit any Fuji spray gun

The Fuji industrial spray equipment mini-cup set provides you with a 3-piece set of 8-ounce (1/2 pint) cups for use with your spray gun. These small cups make it easier for you and your spray gun to access confined areas such as cabinets and bookshelves; they are the perfect size for holding the paint needed for touch-up jobs, smaller projects, or when you want to quickly change between colors. Their lightweight design takes weight off your wrist and lessens fatigue. Each of the 3 cups comes with a heavy-duty lid and gasket for secure paint or stain storage. These mini-cups are pressurized to provide a consistent spray pattern and can be used with any Fuji spray gun…. more >>

Rating: (out of 4 reviews)

>>Read more about Fuji Industrial Spray Equipment 9080 Mini-Cup Set, 3-Piece

• 1,250 staples
• .050 wire
• 3/8″ crown width
• 1/2″ leg length
• Fit the following Arrow staple and/or nail guns: T50, T50PBN, T55, ET50, ET50BN and ET50PBN

For Use In: – Arrow – PowerShot – Craftsman – Black and Decker – Stanley – Ace – And Other Narrow Crown Heavy-Duty Staple Guns – 1,250 Staples – Made in USA… more >>

Rating: (out of 1 reviews)

>>More about Arrow Fastener 508 1/2-Inch T50 Staples (1,250-Pack)

• Pack of 3/4-inch 23 gauge pins
• Coated finish protects against damage
• For use with the Bostitch HP118K and TU-216-2330 Headless Pinners
• Packaged in box of 3000
• For Use in the Bostitch HP118K and TU-216-2330 Headless Pinners

23 gauge headless micro pins fit all 23 gauge pin nailers. Nails leave no visable mark in the workpiece. 3000 nails. For use in the Bostitch model No. HP118K and other pin nailers. No. PT 2312 3M: 1 2″ No. PT 2319 3M: 3 4″ No. PT 2325 3M: 1″ No. PT 2330 3… more >>

Rating: (out of 2 reviews)

>>Find more about Bostitch PT-2319-3M 3/4-Inch 23 Gauge Pin (3000 per Box)

• 1,250 staples
• .050 wire
• 3/8″crown width
• 5/16″ leg length
• Fit the following Arrow staple and/or nail guns: T50, T50PBN, T55, ET50, ET50BN and ET50PBN

Arrow’s T50 5/16-inch staples are made of .050 wire with a 3/8-inch crown and 5/16-inch leg length. They come 1,250 to a pack…. more >>

>>Read more about Arrow Fastener 505 5/16-Inch T50 Staples (1,250-Pack)

• Pack of 3-inch 20 to 22 degree framing nails
• Hot-dipped galvanized for durability
• For use with select Hitachi, Duo-Fast, Senco, Makita, Porter-Cable, DeWalt, and Max nailers
• Conveniently packaged in box of 500
• Porter-Cable FR350, FR350MAG, and SN890RH

B & C Eagle, 500 Count, 3″ x .120, Ring Shank, Hot Dipped Galvanized, Plastic Collated, Framing Nails, With Full Round Head, Fits The Following Nail Guns: Hitachi Nr83a, Nr83a2, Nr83a2s, Nr90ac, Duo-Fast Cn350, Senco Sn60, Sn65, Makita An8300, An922, Porter Cable Fr350, Fr350a, Fr350mag, Max Sn890rh, Bostitch N88rh, N95rhn, F21pl, Bosch Sn350-20F, B&C Eagle Sn2290, Dewalt D51844, D51850, Rigid R350rha, Milwaukee 7100-20 & Most Other 20 To 22 Degree Full Round Head Framing Nailers…. more >>

Rating: (out of 2 reviews)

>>More about B & C Eagle A3X120HDR/22 Full Head 3-Inch by .120-Inch 20 to 22 Degree Plastic Collated Hot Dipped Galvanized Ring Shank Framing Nail (500 per Box)

• Ergonomically designed handle
• Quiet – only 84 DBA with 3 forward settings and 1 reverse setting for perfect speed and torque, perfect for any shop
• 200-800 ft./lbs. working torque 1,000 ft./lbs. loosening torque (reverse)
• Twin hammer mechanism
• 3 forward settings and 1 reverse for perfect speed and torque

The superior mechanics and internal mechanisms of the AirCat impact wrench includes high-quality bearing surfaces, air chambers and turbines. The patented exhaust muffler/filter technology reduces the level of noise while retaining more power and torque. A quiet, powerful tool ideal for shop or home applications. Drive (in.): 1/2, Average Air Consumption (CFM): 4, CFM at Load: 4, Speed – No Load (RPM): 8,000, Max. Torque (ft.-lbs.): 1,000 in reverse, Working Torque (ft.-lb.): 200 – 800, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Hammer Mechanism: Twin, Variable Speed: Yes, Noise Level (dB): 86, Tool Weight (lbs.): 4.3… more >>

Rating: (out of 8 reviews)

>>See Aircat 1000TH Twin Hammer 1/2-Inch DR Impact Wrench other details

• 1 3/8″ Length
• Chisel Point
• Coated Finish
• 3000 Brads Per Box
• For Use in the Bostitch BT200K-2 Industrial Brad Nailer

For use in Bostitch pneumatic brad nailers model No. BT35B, BT50B, SB-1842BN, SB-1850BN, T29-30, and T31-1B. 18-gauge. Fits all 18-gauge brad tools. Color: Brown. No. BT1300B: 5/8″ long, 3000 per box No. BT1309B: 1″ long, 3000 per box No. BT1335B: 1-3/8″ long, 3000 per box No. BT1340B: 1-9/16″, 2000 per box No. BT1350B: 2″, 2000 per box… more >>

Rating: (out of 2 reviews)

>>Other details about Bostitch BT1335B 1-3/8-Inch 18 Gauge Brad Nails (3,000 per Box)

• Distinctive appearance, similar to IR ThunderGun racing tool
• Adjustable power regulator
• The Ingersoll-Rand fastest 1/2-inch impact wrench available
• 625-feet-per-pound of maximum reverse torque; 550-feet-per-pound of forward torque
• Weighs 6-pounds

Hear and feel the power of the Thunder Gun. Looks and sounds just like the original tool used by 80% of NASCAR pit crews! Features a black powder-coated handle and housing. Put this tool to work at the track or in your garage, and at a much more affordable cost than the original. U.S.A. Drive (in.): 1/2, Average Air Consumption (CFM): 5.4, CFM at Load: 21, Speed – No Load (RPM): 10,000, Blows Per Minute (BPM): 1,200, Max. Torque (ft.-lbs.): 625, Working Torque (ft.-lb.): 40 – 400, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Standard Bolt Capacity (in.): 5/8, Variable Speed: YesDo you want to get as close as you can to a NASCAR pit crew without setting foot on a pro track? Then the Ingersoll Rand 232TGSL 1/2-Inch Super-Duty Air Impact Wrench Thunder Gun is the choice for you. At a much more affordable price than the NASCAR pros’ model, this tool will soon be an invaluable favorite in your shop or garage.
1/2-Inch Super-Duty Air Impact Wrench Thunder Gun
At a Glance:Fastes… more >>

Rating: (out of 9 reviews)

>>Find more about Ingersoll-Rand 232TGSL 1/2-Inch Super-Duty Air Impact Wrench Thunder Gun

• Stapler drives 3/4- to 1-1/2-inch staples with caps; applications include installing Tyvek, tar paper, and foam-board insulation
• Adjustable depth guide
• Lightweight, dureable aluminum housing weighs only 4.7 lbs
• Includes oil, hex wrench, 1000 caps, 1000 staples, carrying case
• 7-year warranty

A strong blast of wind can set you back to square one if you’ve just spent the past few hours wrapping new construction or a house about to be sided. You know that the holding area of a staple isn’t great, but a 1-inch-diameter plastic cap on the staple gives it superior holding power. Bostitch’s cap stapler fires 18-gauge cap staples into tar paper, felt paper and foam insulation sheets like nobody’s business, keeping the wrap right where you put it. Depth of drive adjustments are tool-free, a nice feature when you’re 30 feet above the ground. It’s surprisingly light, it loads like a dream and lacks nothing in the power department. This is one of those tools that only does one thing, but boy, does it do it well.–Kris Jensen-Van Heste… more >>

Rating: (out of 8 reviews)

>>More about Bostitch SB150SLBC-1 3/4-Inch to 1-1/2-Inch Cap Stapler Kit

• .563 x .188
• 5,000 / Carton
• Zinc plating to protect against rust
• 9/16″ x 20 Gauge Divergent

For use with Duo-Fast ENC5418 Electric Stapler, Zinc plating to protect against rust, Divergent Point…. more >>

Rating: (out of 2 reviews)

>>Other details about Duo-Fast 5418D 9/16-Inch by 20 Gauge 3/16 Crown Gold Staple (5,000 per Box)