Air Hand Tools

• 1/4″ Extended Die Grinder – RPM: 25,000. Air Inlet: 1/4″ NPT. 90 PSI. Wt: 1-1/4 lbs.
• RPM: 25,000. Collet size: 1/4″. Length: 10-1/4″. Weight: 1-1/4 lbs. Air Inlet: 1/4″ NPT.
• Air Pressure: 90 PSI Max. Direct Drive. Rear Exhaust. Full ball bearing construction.
• The extended design allows you to reach deep into areas that would be impossible with other tools.

Product Description
RPM: 25,000. Collet size: 1/4″. Length: 10-1/4″. Weight: 1-1/4 lbs. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI Max. Direct Drive. Rear Exhaust. Full ball bearing construction. Powerful .25 HP motor. The extended design allows you to reach deep into areas that would be impossible with other tools…. More >>

Taylor Pneumatic: 1/4″ Extended Die Grinder – RPM: 25,000. Air Inlet:1/4″ NPT. 90PSI. Wt: 1-1/4 lbs.

• Punch Size: 3/16″. Length: 10″. Weight: 1-1/4 lbs. Tool Diameter: 2-1/4″. Air Inlet: 1/4″ NPT.
• Air Pressure: 90 PSI. Heads swivel 360 degrees. Lightweight. Crimps up to 14 guage steel.
• Tool steel punch and punch guide. This tool is a must for every sheet metal and body shop.

Product Description
Punch Size: 3/16″. Length: 10″. Weight: 1-1/4 lbs. Tool Diameter: 2-1/4″. Air Inlet: 1/4″ NPT. Air Pressure: 90 PSI. Heads swivel 360 degrees. Lightweight. Crimps up to 14 gauge steel. Tool steel punch and punch guide. This tool is a must for every sheet metal and body shop…. More >>

Taylor Pneumatic: 3/16″ Punch/Flange: Air Inlet: 1/4″ NPT. 90PSI. swivel 360 degrees

• 3/8in3-1/4out a manifold
• 3-in-1 air manifolds, lightweight, aluminum body
• Supply 3 air tools from a single outlet
• No need to disconnect and connect for every tool change
• 3/8 inlet NPT Female x 1/4 (3) outlets NPT Female.

Product Description
3 in 1 air manifolds, lightweight, aluminum body. Supply 3 air tools from a single outlet. No need to disconnect and connect for every tool change. 3 8″ inlet NPT Female x 1 4″ (3) outlets NPT Female…. More >>

Milton Ind/INCOM S-685-6 Air Manifold

• “FLEXEEL” POLYURETHANE SHOP AIR HOSE
• Inside Diameter: 3/8
• Outside Diameter: 9/16
• Length: 25 feet
• Working Pressure: 200 psi

Product Description
“FLEXEEL” POLYURETHANE SHOP AIR HOSE

Inside Diameter: 3/8
Outside Diameter: 9/16
Length: 25 feet
Working Pressure: 200 psi
Male Pipe Size: 1/4″ NPT
Color: Blue
1/3 the weight of rubber shop air hose.
Resistant to lubricating oils, grease, and abrasion.
UV stabilized for longer outdoor service life.
Retains flexibility in subzero temperatures from -40° F. to 165° F.
Will last 4 to 5 times longer than standard rubber shop air lines under normal use…. More >>

IMPERIAL 95915 “FLEXEEL” REINFORCED SHOP AIR HOSE 3/8IDx9/16OD – 25′ LENGTH

• Air Grinder, Right Angle, 12000 RPM

Product Description
Air Grinder, Right Angle, 12000 RPM… More >>

Sioux Air Grinder, Right Angle, 12000 RPM Model SIOUX1968

Product Description
… More >>

H Style 3/8in. Female Basic Size Industrial Interchange Series Air Coupler

Product Description
HOSE SOURCE FLEXTREME AIR HOUSE
1/4 X 25 FT

CONSTRUCTION:

- HIGH GRADE SPECIALLY FORMULATED COMPOUNDS
- REINFORCED WITH HIGH TENSILE POLYESTER YARN

FEATURES:

- EXCELLENT LOW TEMPERATURE FLEXIBILITY
- EXTREMELY EASY TO HANDLE
- EXCELLENT ABRASION RESISTANCE
- NON MARKING PIN-PRICKED COVER
- VERY LIGHTWEIGHT

SERVICE TEMPERATURE RANGE:

-40F TO 150 F

WORKING PRESSURE:

-300 PSI 4-1 SAFETY FACTOR

STANDARD COLOR:

-HIGH VISIBILITY YELLOW… More >>

ULTRA FLEXIBLE AIR HOSE -1/4″ X 25FT

• Plews/Edelmann Air Line Nipple 1/4 Male 12325
• PLEWS/EDELMANN

Product Description
Identified by a 5/16″ pilot and nearly round ball groove. Similar appearance to the Industrial Interchange and care must be taken to correctly identify. Intended for compressed airlines only. 300 PSI maximum rated working pressure…. More >>

Plews/Edelmann Air Line Nipple 1/4 Male 12325

• Hbd Industries 1/4X50Ft Red Air Hose 522-50
• HBD INDUSTRIES INC

Product Description
300 pound working pressure. EDPM tube and cover. Four spiral polyester reinforcements. Kink resistant and flexible in extreme temperatures. With brass NPT male fittings…. More >>

Hbd Industries 1/4X50Ft Red Air Hose 522-50

• Sold Individually

Product Description
Item #: SGT94000. Features & Benefits:Retains chisels with .401o shanks.Chisels can be installed and removed quickly.For the busy mechanic.
Customers also search for: Tools and Storage\Pneumatics\Pneumatic Tool Retainers Discount Quick Change Spring Chisel Retainer, Buy Quick Change Spring Chisel Retainer, Wholesale Quick Change Spring Chisel Retainer, 638570940008, ToolWeb, Air Tool Retainers… More >>

Quick Change Spring Chisel Retainer Category: Pneumatic Tool Retainers